22 EN | VIDEO PLAYBACK |
Normal Playback
VOL. +/–
VIDEO/MEMORY Switch
Play/Pause
Button (4/9)
To control the speaker volume…
Press VOL. + to turn up the volume, or VOL. – to turn down the volume.
Still Playback
Pauses during video playback.
1) | Press 4/9 during playback. |
2) | To resume normal playback, press 4/9 again. |
| ● If still playback continues for more than about |
| 3 minutes, the camcorder’s Stop mode is |
| automatically engaged. |
Speaker
Stop Button (8)
Power Switch
Lock Button
SHUTTLE SEARCH Ring (3/5)
● When 4/9 is pressed, the image may not |
pause immediately while the camcorder |
stabilizes the still image. |
Shuttle Search
Allows
1) | During playback, turn the SHUTTLE SEARCH |
| Ring to the right (5) for forward search, or to |
| the left (3) for reverse search. |
2) | To resume normal playback, press 4/9. |
| ● During playback, turn the SHUTTLE SEARCH |
1Load a cassette. ( pg. 16)
2Set the VIDEO/MEMORY Switch to “VIDEO”.
3Set the Power Switch to “P” while pressing down the Lock Button located on the switch.
4To start playback, press 4/9.
5To stop playback, press 8.
●During Stop mode, turn the SHUTTLE SEARCH Ring to the left (3) to rewind, or to the right (5) to
NOTES:
●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to “OFF”, then to “P”.
●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV.
( pg. 24)
●You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camcorder body.
●LCD monitor/viewfinder indications:
•When power is supplied from a battery: the
“
” battery indicator is displayed. ( pg. 100)
•When power is supplied from an AC outlet: the
“
” battery indicator does not appear.
•During Stop mode, none of the indications are displayed.
●When the S/AV/Editing cable is connected to the S/AV connector, the sound is not heard from the speaker.
Ring to the right (5) or to the left (3) and |
hold it. The search continues as long as you |
hold the ring. Once you release the ring, |
normal playback resumes. |
● A slight mosaic effect appears on the display |
during Shuttle Search. This is not a |
malfunction. |
ATTENTION:
During Shuttle Search, parts of the picture may not be clearly visible, particularly on the left side of the screen.