Philips WACS7500, WAS7500 5.2Eco Standby power-savingmode, 5.3Auto-Standby, 5.4Volume control

5.2Eco Standby (power-saving mode)

In the power-saving mode Eco Standby, the display and Wi-Fi connections of the product are turned

off.The HD (Hard Disk) of also becomes inactive.When is switched to Eco Standby, you

cannot stream music between and or import music from the PC to . During Eco Standby the remote controls are inactive.

1With the set switched ON, press & hold y:

/ changes to Eco Standby. The button lights up red.

The display is switched off.

2To switch the / ON, press y on the set. (The remote controls are still inactive.)

/ switches to the last source selected.

Tip

•In the power-saving mode Eco Standby, the settings for networking, sound, display, language and CD recording, as well as the tuner presets, and the volume level (maximum: moderate level) will be retained in the memory of the set.

•To protect the HD, always switch to Eco Standby before removing its power plug from the mains outlet.

•Remember that the remote controls are inactive during Eco Standby.

5.3Auto-Standby

If at the end of playback / recording (ripping) the set remains in the stop mode for longer than 20 minutes, the set will automatically switch to Standby mode in order to save power.

5.4Volume control

1Check that playback has started.

2Adjust the volume with VOL +/- buttons.

> Display shows a horizontal bar indicating the volume level.

ENGLISH

Basic functions 31