Philips WACS7500, WAS7500 manual Station enters automatic installation mode, Delete a Station

Models: WACS7500 WAS7500

1 99
Download 99 pages 53.44 Kb
Page 71
Image 71
>The following messages are shown in succession:

On a Station that was already paired with another Center: a Press MENU

b Select Installation mode

> Station enters automatic installation mode.

2Disconnect the power plug of > HD screen appears once  is connected to  . and then connect it to the power supply again. > Display: Connecting to Center

3On remote control, press MENU to enter Installation Mode.

>The following messages are shown in succession:

Center found Connecting to Center...

On 11.1.1 Delete a Station (  ) :

4Press STOP 9 when all the > The list of connected  will be displayed on  . are found.

> HD screen appears once Manual background is connected to Manual background .

11.1.1 Delete a Station ( Manual background )

1Check that Manual background is in HD source.

2Press MENU to enter the menu screen.

3Use 3 or 4 and 2 to enter Station Management (Mgnt) menu.

4Press 3 or 4 and 2 to select Delete Station.

> The list of connected Manual background will be displayed on Manual background .

5Use 3 or 4 and 2 to select Manual background you wish to delete.

6Press 3 or 4 and 2 to select YES.

ENGLISH

Network settings

67

Page 71
Image 71
Philips WACS7500, WAS7500 manual Station enters automatic installation mode, The following messages are shown in succession