Roberts Gorden HE-60 Heater Installation, Severe Injury Hazard, Cut/Pinch Hazard, Edges are sharp

Models: HE-125 HE-150 HE-100 HE-40 HE-175 HE-80 HE-60

1 72
Download 72 pages 53.49 Kb
Page 21
Image 21

SECTION 6: HEATER INSTALLATION

SECTION 6: HEATER INSTALLATION

WARNING

Severe Injury Hazard

Secure burner to burner tube with bolts and lockwashers.

Hang heater with materials with a minimum working load of 75 lbs (33 kg).

Failure to follow these instructions can result in death, injury or property damage.

Expansion and contraction of the tube dictates that the minimum suspension lengths in the table on Page 16, Figure 14 be maintained.

WARNING

Cut/Pinch Hazard

Wear protective gear during installation, operation and service.

Edges are sharp.

Failure to follow these instructions can result in injury.

To ensure your safety, and comply with the terms of the warranty, all units must be installed in accor- dance with these instructions.

The gas or the electrical supply lines must not be used to support the heater.

Do not locate the gas or electric supply lines directly over the path of the flue products from the heater.

The heater must be installed in a location that is readily accessible for servicing.

The heaters must be installed in accordance with clearances to combustibles as indicated on the rating plate and in this instruction manual.

The minimum and maximum gas inlet pressures

must be maintained as indicated on the rating plate.

Typical installation configurations are shown in Figure 14.

15

Page 21
Image 21
Roberts Gorden HE-60 Heater Installation, Severe Injury Hazard, Secure burner to burner tube with bolts and lockwashers