SECTION 10: WIRING

SECTION 10: WIRING

DANGER

Electrical Shock Hazard

Disconnect electric before service.

Heater must be properly grounded.

Failure to follow these instructions can result in death or electrical shock.

Heaters can be controlled using several methods. Normally thermostats are used to control the heaters but they can also be controlled by an Energy

Management System. Section 10.1 below illustrates the connection for heaters controlled by a line voltage thermostat. NOTE: In order to use line voltage ther- mostats, the low voltage terminal located at the back of each burner must be connected as shown in the detail. For a single heater on a low voltage thermo- stat, See Section 10.2 below. To control multiple heaters on one low voltage thermostat, See Page 46, Section 10.3. NOTE: In order to control multiple heat- ers on one low voltage thermostat, the low voltage terminals on each heater must be connected as shown in detail. Heaters must be grounded in accor- dance with applicable codes: United States: refer to National Electrical Code® ANSI/NFPA 70 - latest revi- sion Canada: refer to Canadian Electrical Code CSA C22.1 Part I - latest revision.

If any of the original internal wiring must be replaced, it must be replaced with wiring materials having a temperature rating of at least 105° C and 600 V.

10.1 Line Voltage Thermostat Wiring

 

Line Voltage

Burner 1

 

Burner 2

 

 

 

 

 

 

 

Thermostat

 

 

 

 

120 V-60 Hz

T

Gnd.

 

Gnd.

 

 

 

 

 

Supply Circuit

H

N

H

N

 

L1

Additional

 

 

 

 

L2

 

 

 

 

Burners

 

 

 

 

 

Gnd.

 

 

 

 

 

10.2 Low Voltage Thermostat with One Burner

 

 

 

 

Thermostat

 

 

 

 

Wires

 

 

 

 

(Black)

120 V-60 Hz

 

 

 

 

Supply Circuit

H

N

Gnd.

Purple

L1

T

Blue

L2

 

 

Low Voltage

 

 

 

Thermostat

Low voltage

Gnd.

 

 

 

 

 

terminal detail

 

 

 

 

45

Page 51
Image 51
Roberts Gorden HE-175, HE-60, HE-80, HE-40, HE-100 Line Voltage Thermostat Wiring, Low Voltage Thermostat with One Burner

HE-125, HE-150, HE-100, HE-40, HE-175 specifications

Roberts Gordon is renowned for its innovative heating solutions, and among its standout offerings are the HE-125, HE-175, HE-100, HE-150, and HE-40 heaters. These products exemplify cutting-edge technology and efficiency designed for commercial and industrial applications.

The HE-125 and HE-175 variants are among the top-rated infrared heaters available. They utilize advanced infrared technology to provide direct heating to objects, reducing the need to heat the entire ambient air volume. This method results in energy savings while delivering consistent warmth where it's needed most. The HE-125 model has a heating capacity of 125,000 BTU, while the HE-175 pushes this to 175,000 BTU, making them suitable for larger spaces like warehouses and manufacturing facilities.

The HE-100 and HE-150 heaters are designed for flexibility and efficiency in a range of operational environments. These models support a wide range of input fuels including natural gas and propane, making them an adaptable choice for various setups. The HE-100 has an output of 100,000 BTU, and the HE-150 follows with 150,000 BTU. Both units are engineered with robust construction materials, ensuring durability and longevity, while also featuring advanced safety systems to prevent overheating and other hazards.

In contrast, the HE-40 heater stands out for smaller spaces, making it an ideal option for garages, workshops, or smaller commercial environments. With a capacity of 40,000 BTU, it effectively delivers consistent warmth without the excessive energy consumption associated with larger units.

All Roberts Gordon models prioritize energy efficiency, often meeting or exceeding current energy codes. They incorporate advanced control systems that allow precise temperature regulation, further optimizing energy use. Additionally, the heaters are designed with minimal maintenance needs, featuring durable components that ensure long-term reliability and performance.

With a legacy of quality and innovation, Roberts Gordon continues to set the standard in infrared heating technology. The HE series exemplifies a commitment to efficiency, safety, and versatility, making them suitable for a wide range of commercial and industrial applications. Whether heating a vast warehouse or a small workshop, these heaters provide reliable performance tailored to user needs.