Philips WAS7500, WACS7500 manual Preparation, Mounting Station

18.1.3 Preparation

Try the necessary rear connections and the Wi-Fi connections between AND in order to find a suitable location for installation/mounting (see 3 Installation).

Important!

To avoid the risk of injury and damage to property as well as to the product:

•Check for supply lines (gas, water, electricity, etc.) before drilling holes.

•Assess the type of screws necessary to bear Station.

•Choose the right drill and bit for the type of wall to drill the holes.

•Take all other precautions to be observed when carrying out this type of mounting/installation job.

18.1.4 Mounting Station

You can mount Station to the wall using the provided bracket.

1Align the bracket in the chosen location on a wall. Use a pencil to mark the drilling positions.

2Drill the holes as marked.

3Fix the bracket to the wall using suitable screws (not provided) and wall anchors (not provided) for all the holes provided in the wall mounting bracket.

4Use a screwdriver and fasten the supplied screws to as shown.

5Hook / mount in place as shown.

92 Appendix