Philips WAS7500 11.2Connect to Wi-Fiwireless enabled home network, Network settings on Center

11.2Connect to Wi-Fi (wireless) enabled home network

The Wi-Fi enable network is a Wi-Fi infrastructure network or a Wi-Fi enable home network with a router.

Important! Connections that include a Wi-Fi router require that the router is switched on at all times.

1To connect or to a Wi-Fi enabled home network, start the Add Network procedure

on or respectively.

2For music playback within the home network, see 9.3 UPnP Playback.

11.2.1 Network settings on Center ( )

Note

For WEP(Wired Equivalent Privacy) / WPA (Wi-Fi Protected Access) key setting to secure your network, always refer to the user manual of the Router.WPA is the newest and strongest encryption method. If this is not available (generally for older devices) choose WEP.

On , search for networks:

1Press MENU to enter the menu screen.

2Use 3 or 4 and 2 to enter Settings followed by Network, then Wireless. > Display: Searching for Networks…

List of networks appears. (Network Not Found appears if no network is found.)

3Select the Wi-Fi network where your desired UPnP device is located.

4Press 2 to continue.

5		If you already know the WEP/WPA	Use the 1-way remote control	Press OK to
		key for the Wi-Fi network:	to enter the WEP or WPA key.	confirm.
		If there is no WEP/WPA key for the	Press OK to skip.
		Wi-Fi network:
6	In screen Set IP Mode, select Automatic

68 Network settings