Symphonic CHSP80G Troubleshooting Cont’d, Symptom Solution, Every time the power turns on

Others

Troubleshooting (Cont’d)

	Symptom		Solution
		The power does not turn on.	• Check that the AC power cord is connected securely.
			• Batteries of the remote control are weak.
P		The unit turns on automatically without	• The unit turns on automatically 3 minutes before the Timer
		any operation.	Recording.
O

WThe OSD Language Setting Menu appears • Finish up the Language Setting procedure by selecting a

E	every time the power turns on.	language in the OSD Language Setting Menu. Press ENTER to
R		activate the setting.

The power turns off automatically . • The power turns off automatically when abnormality is detected on the disc. Press POWER or OPEN / CLOSE A to open the disc tray, and before it is opened completely, press the button again.Then take out the disc.

•The power turns off automatically when an OTR is completed.

Symptom	Solution
The unit does not function.	•	or error message appears if the operation is prohibited.

•Batteries of the remote control are weak or exhausted

G	No picture, sound or menu appears on	• Check if the connections are made securely and correctly.
	the screen.	• Check if the cables are not damaged.
E
		• Check if a correct external input channel is selected on your
N
		TV. (See page 17.)
E
		• Check if you have completed the Channel Setting.
R
	No picture or menu appears on the	• COMPONENT VIDEO OUT connection is not available in the
A
L	screen in the DVR mode.	DVR mode. Use other connection such as VIDEO OUT or
		S-VIDEO OUT.
	Clock Setting and Channel Setting cannot	• If a Timer Recording is in standby or if a recording is in
	be performed.	progress, these operations cannot be performed. Delete timer
		programs or stop the recording.
	The unit does not operate properly.	• Moisture has condensed inside the unit. Remove the disc and
		leave the unit turned on until the moisture evaporates.
		(See page 4.)

Before You Start Connections

DVR

DVD

Others

EN 87