Symphonic CHSP80G owner manual Recording & Playback, Navigator, To Change or Cancel Program

DVR (Recording)

Recording & Playback Navigator (Cont’d)

Programming a Recording with		3 To change the program
the Recording & Playback		Using	/	, select “Program Change”, then
Navigator		press ENTER.
		Timer Programming Window will appear.
		Correct the information, then press ENTER.
	1 Press PROGRAM RECORDINGS.
		To cancel the program
	The Programmed Recordings Screen will appear.
		Using	/	, select “Timer Program”, then
	2 Using / / / , select the desired cell.
		press ENTER.
	• For example, to record from 4:00 pm in two days	Timer Programming List will appear.
	from the present day, choose the cell as follows.	Press CLEAR .

Before You Start Connections

ordings			Scheduled Recordings
THU	FRI	TODAY	SUN MON TUE WED THU	FRI	SAT
		PM
		3
		4
		5
Present day				Cell

Tomorrow Day after tomorrow

There are two ways to program a recording.

1) Direct Program---Press CHANNEL / or the Number Buttons to select a channel. Press ENTER.The cell turns pink indicating that the timer programming is now set in that cell.

Press PROGRAM RECORDINGS to exit.

2) Detailed Program---Press ENTER “New Program” will appear.With “New Program” selected, press ENTER again. Timer Programming Window will appear.

Date Start Time End Time CH

Fri	FEB /	3	9 :	00	AM	10	:	00	AM	8
									DVR	29:06

Confirmation window will appear. Select “Yes”, using / and press ENTER.

To program a new Timer Recording

Using / , select “New Program”, then press ENTER.

4 Press TIMER PROG. to exit.

Playback and Edit with Programmed Recordings

1	Press PROGRAM RECORDINGS.
	The Programmed Recordings Screen will appear.
2	Using / / / , select the recorded program.
	The recorded program plays back in the preview
	window.
3	Press ENTER to call up the menu window.

DVR

DVD

Others

Enter the necessary information by following the	Play From Start
	Resume Play
instructions described in ‘Timer Recording’ on pages
	Previous Recordings
28-31.

To Change or Cancel the

Program

1	Repeat steps 1-2 above.
2	Press ENTER to call up the menu window.
		Program Change
		Timer Program
		New Program

4 Using / , select “Play From Start”. Press ENTER.

The recorded program is played back.

If you want to resume playback from the last viewed point:

Select “Resume Play”.

Refer to ‘Resume Playback’ on page 37.

To display a Title List:

Select “Previous Recordings”.

Refer to ‘Playback from the Title List’ on page 37.

EN 33