Symphonic CHSP80G owner manual Timer Recording Cont’d, Recording Date, January 1st

DVR (Recording)

Timer Recording (Cont’d)

1Recording Date:

When pressing at the current date, the setting will change as follows.To go backward, press .

e.g.: January 1st

JAN / 01

Mon-Sun

Mon-Sat

Mon-Fri

Sat

Fri

Sun

JAN / 31

2Start Time:

3End Time:

4Recording Channel:

To record from the external input, select “L1”. (Using camcorder, or other source.)

5Available recording time left on the DVR.

•If there are more than one program, the recording time of the programs other than the one being edited currently will not be counted in the calculation of the total remaining time on the DVR.

3 Using / , select an item to set and using

/ , set the contents to suit your preference.

•Pressing RETURN will resets all the information entered.

4 Press ENTER when all the information is entered. will appear in the Front Panel Display indicating

one or more Timer Recordings are in standby.

•To set another program, repeat steps 2 to 4.

•When programs are overlapped, a warning message will appear. For details on overlapped Timer Programmings, refer to ‘Hints for Timer Recording’ on page 31.

5 To exit, press TIMER PROG..

•If you turn the unit off, it automatically turns on and starts recording 3 minutes before the Timer Recording begins, and when the recording is completed, you will be asked whether to turn off the unit.The unit will be turned off automatically if you select “Yes” or if you do not reply in 1 minute.

•To stop the recording in progress, press STOP C and hold it for 2 seconds, or press STOP C on the front panel.

Note

•If you have not set the clock yet:

The Clock Setting Window will appear at step 1 instead of Timer Programming List. Continue with step 4 in ‘Auto Clock Setting’ on page 22 or ‘Manual Clock Setting’ on page 23 before setting a Timer Recording.

•After step 5, you can use DVD mode as usual.

•If the starting time and the end time are the same, it will be recognized as 24 hours recording.

•If the starting time you entered is already in the past, the recording will start as soon as you activate the Timer Recording by pressing ENTER at step 4.

•If the Timer Recording you want to make starts at 11:00 PM, for example, and ends at 1:00 AM next day, enter the date of the starting time, then enter the starting time as 11:00 PM and end time as 1:00 AM.

Before You Start Connections

DVR

DVD

Others

EN 29