Symphonic CHSP80G owner manual Connections, Connection to aTV, This unit

Connections

Connection to aTV

Antenna	Cable	(Back of TV)
	TV signal

(Back of TV)				3
	or
				Connect
			RF cable
			(supplied)
1			COMPONENT
Disconnect	T			VIDEO IN
		L	Y VIDEO OUTPUT		IN
			PB/ S-VIDEO
			CB	L
				R	OUT
	1	R	PR/
			CR	AUDIO IN	ANTENNA
	OUT		OUT

(Back of this unit)

Antenna

Cable

TV signal

or

2

Connect

4	Plug in the AC power
	cord of this unit.

Note

•You can connect to TV with A/V cables and RF cable.

Choose one of the following connections, depending on the capabilities of the equipment you possess.

Basic Audio Connection Video Connections

	Method 1
Basic Audio	Good picture
TV
AUDIO IN	VIDEO IN

Method 2	Method 3
Better picture	Best picture
	(Compatible
	with the
	Progressive	COMPONENT
S-VIDEO IN	Scan mode)	VIDEO IN
		Y
		CB
		CR

Audio cable (supplied)

This unit

VIDEO OUT				COMPONENT	VIDEO IN
				Y VIDEO OUTPUT		IN
AUDIO OUTPUT		L	L	PB/ S-VIDEO
/BITSTREAM				CB		L
						R
	2	R 1	R	PR/		OUT
COAXIAL				CR	AUDIO IN ANTENNA
		AUDIO OUT		OUT

Video cable (supplied)

VIDEO OUT			VIDEO OUT
	L	L		L	L
2	R 1	R	2	R 1	R
	AUDIO OUT			AUDIO OUT

S-Video	Component
cable
(commercially	video cable
available)	(commercially
	available)
S-VIDEO	COMPONENT
	Y VIDEO OUTPUT
	PB/
	CB
OUT	PR/
	CR

AUDIO OUT VIDEO OUT

S-VIDEO OUT	COMPONENT
	VIDEO OUT

Note

•Connect this unit directly to the TV.

•You will not be able to hear all of the sound being output by this unit if you use the video/audio cables (supplied) to a monaural TV that has only one audio input jack.

•Be sure that the colors of the jacks and plugs match up when connecting the cable.

•If your TV is compatible with the Progressive Scan System, and you want to utilize its feature, use the COMPONENT VIDEO OUT connection. If you use any other connection such as VIDEO OUT or S-VIDEO OUT, the picture will not be output in the Progressive Scan mode but in the standard output mode (Interlace).

If yourTV is compatible with 525p (480p) progressive scanning and you want to enjoy the high quality picture;

You must select the connection Method 3 to utilize the progressive scanning mode.To set the mode on/off, press and hold B PLAY on the front panel for more than 5 seconds so that “P-SCAN”will appear on the Front Panel Display.

(The progressive scanning is not available in the DVR mode.)

If yourTV is not compatible with Progressive Scan;

Use this unit in the interlace mode. Make sure that no “P-SCAN”is on the Front Panel Display. If “P-SCAN”is on the Front Panel Display, press and hold B PLAY on the front panel for more than 5 seconds to turn it off.

16 EN