Symphonic CHSP80G Symptom Solution Titles can not be edited or deleted, Following the steps on

Others

Troubleshooting (Cont’d)

	Symptom	Solution
E
D	Titles can not be edited or deleted.	• The titles itself may be protected. Cancel the protection by
I
		following the steps on page 48.
T
I
N
G

	Symptom		Solution
R		No operation by remote control	• Check if the batteries are weak or inserted incorrectly.
E
			Replace weak batteries and insert with their polarities
M
O			(+/- signs) as indicated.
T			• Aim the remote control at the remote sensor and operate
E
			within 23 feet (7 m) of the unit.
C			• Remove all obstacles to clear the path of the infrared signal.
O			• Refer to the infrared signal. (See page 13.)
N			• Select the correct mode to operate by pressing DVR or DVD.
T			• The operable range from the unit is 10 feet (3m) within 15˚.
R
O
L		Pressing SET UP does not do anything.	• While the Programmed Recordings Screen, or the Title List is
			displayed or while the disc is loading, SET UP does not
			respond.
	Symptom		Solution
O		The Clock display does not appear	• Check that the AC power cord is connected securely.
T		in the Front Panel Display.	• (In case of power failure) Check the breaker and Clock Setting.
H
E		When you forget the password
R			• Please cancel the password and the set level. (See pages 83-84.)
S		for Parental Lock.

* If you are still having trouble with this unit after checking ‘Troubleshooting’, write down the error code and the error description, and call our helpline mentioned on the front page to locate an Authorized Service Center.

90 EN