Symphonic CHSP80G owner manual Clock Setting Cont’d, Manual Clock Setting

DVR (Initial Setups)

Clock Setting (Cont’d)

5 If you do not know the PBS channel number in your area :

Using / , select “Auto”. Press ENTER.

Your setting is now activated.

If you know the PBS channel number in your area :

Using / , select “Manual”. Press ENTER. Input window will appear.

Set Channel No.

CH 1

Using the Number Buttons or / , enter the PBS channel number. Press ENTER.

Your setting is now activated.

If you want to set the clock manually and to cancel the Auto Clock Setting :

Using / , select “Off ”. Press ENTER. The Auto Clock Setting will be canceled.

• The default setting is “Auto”.

6 Press SET UP to exit.

7 Press POWER to turn off the unit.

This unit will search for the clock time only when the power is off. Leave it off for several minutes to give the unit a time to set the clock.

Note

•The clock may set itself automatically after you connect the antenna / cable signal to this unit and plug in the power cord. In this case, the current time will appear on the Front Panel Display.

•If the current time is not displayed or the displayed clock time is not correct, set the clock manually.

Manual Clock Setting

1 Press SET UP.

“Easy Setting Menu” or “Advanced Menu” will appear.

	Advanced Menu
		DVR Menu	Erase All in DVR
		Initial Setup
		Timer Program
	Easy Setting Menu
2 Using	/ , select “Initial Setup”. Press ENTER.
	Advanced Menu
		DVR Menu	OSD Language
			Clock Setting
		Initial Setup	Channel Setting
		Timer Program Playback
			Record
	Easy Setting Menu		Reset to factory default
3 Using	/	, select “Clock Setting”.
Press ENTER.
Clock Setting Menu will appear.
		Clock Setting
		Clock Setting
		Auto Clock Setting
		Daylight Saving Time
4 Using	/	, select “Clock Setting”.
Press ENTER.

Clock Setting Window will appear.

Clock Setting

JAN / 1 / 2006 (Sun) -- : -- AM

5 Using	/ , move to the item you want to set and
using	/ , change the setting the current date and
time.

Before You Start Connections

DVR

DVD

Others

6 When all the information is entered, press ENTER. Your setting is now activated.

Although seconds are not displayed, they will be counted from zero.

7 Press SET UP to exit.

Note

•Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds.

EN 23