Philips WACS7500 Set network on Station If there is no DHCP, On the display, the icon changes to

6In Set IP Mode screen: If you are using a DHCP* enabled network device, select Automatic.

ENGLISH

*DHCP stands for Dynamic Host Configuration Protocol. It is a protocol for assigning dynamic IP addresses to devices on a network.

11.3.2 Set network on Station ( )

If there is no DHCP:

1Select Static and assign an IP address and subnet mask as prompted, using the alphanumeric keys (see 4.4 Prepare: Alphanumeric keys).

2As prompted, select YES to apply the settings.

> is connected to the external wired network.

On the display, the icon changes to .

Applicable if you already have a wired home network (hub/switch/router).

Router

www

Wired

Tip

You can connect or directly to your PC using the supplied Ethernet cable and the Wireless Audio Device Manager (WADM) in the supplied PC Suite CD. For details, see section

12 Connect to your PC.

Network settings 71