Philips WACS7500, WAS7500 manual 14.2Restore previous firmware, Connecting to Center appears

Models: WACS7500 WAS7500

1 99
Download 99 pages 53.44 Kb
Page 85
Image 85
14.2Restore previous firmware

14.2Restore previous firmware

After the firmware of >Connecting to Center appears. is upgraded, you can restore it to its previous version as desired.

On > Stations start to connect to  .

1Press MENU to enter the menu screen.

2Use 3 or 4 and 2 to enter Settings followed by Firmware, then Restore firmware.

3Press 2 to select Yes.

After upgrading or restoring the firmware of Manual background , you need to reestablish the Wi-Fi connection

between Manual background and Manual background .

14.3Re-establish Wi-Fi network of Center ( Manual background ) and Stations ( Manual background )

On Manual background :

1Press MENU to enter the menu screen.

2Use 3 or 4 and 2 to enter Station Mgnt menu.

3Use 3 or 4 and 2 to select Add New Station. > Searching for Stations starts.

On Manual background :

1Disconnect the power plug of Manual background and then connect them to the power supply again.

>Connecting to Center appears.

2Press MENU on the remote control to enter the selection screen of Installation Mode and Select Server.

3Use 3 or 4 and 2 to enter Installation Mode.

> Stations start to connect to Manual background .

4Press STOP 9 on Manual background when all Manual background are found.

ENGLISH

Reset

81

Page 85
Image 85
Philips WACS7500, WAS7500 manual 14.2Restore previous firmware, Connecting to Center appears, Stations start to connect to