JVC GR-SXM25 manual Grip Adjustment, Shoulder Strap Attachment, Tripod Mounting

Power Zoom Lever

Recording

Start/Stop

Button

EN11

Grip Adjustment

1	EXPAND LOOP	STARTED
	Separate the Velcro strip.
2
	INSERT HAND	GETTING
	Pass your right hand through the loop and grasp the
	grip.
3
	ADJUST STRAP LENGTH
	Adjust so that your thumb and fingers can easily
	operate the Recording Start/Stop Button and Power
	Zoom Lever. Refasten the Velcro strip.

3 Viewfinder Adjustment

2

180°

1

1 SELECT OPERATION MODE

Set the Power Switch to “CAMERA” (“AUTO” or “PRO.”).

2 POSITION VIEWFINDER

Adjust the viewfinder manually for best viewability (see illustration on left).

3 ADJUST DIOPTRE

Turn the Diopter Adjustment Control until the indications in the viewfinder are clearly focused.

	Set “POWER” to	Shoulder Strap Attachment
	“CAMERA”
	(“AUTO” or	ATTACH STRAP
	“PRO.”)
PAUSE		1 Following the illustration on left, thread the strap
		through the top of the eyelet 1, then fold it back and
		thread it through the buckle 2. Repeat the procedure
		to attach the other end of the strap to the other eyelet
1		3, making sure the strap is not twisted.
2	4	ADJUST LENGTH
		2 Adjust as shown in the illustration on left 4.
3		Tripod Mounting

1 ALIGN AND TIGHTEN

Align the screw and camera direction stud on the tripod with the camera’s mounting socket and stud hole. Then tighten the screw.

CAUTION:

When using a tripod, be sure to open and extend its legs fully to stabilise the camcorder. To prevent damage to the unit caused by falling over, do not use a small-sized tripod.