18ENRECORDING
BasicFeatures(cont.)
5 SEC. REC Button
P. STABILIZER Button
Display
PAUSE
5S
Power Switch
5 Sec. Rec mode indicator
Picture stabilizer indicator
FEATURE: Picture Stabilizer
PURPOSE:
To compensate for unstable images caused by camera- shake, particularly at high magnification.
OPERATION:
1)Press P. STABILIZER. “ ”appears.
■To switch off the Picture Stabilizer, press P. STABILIZER. The indicator disappears.
NOTES:
●Accurate stabilisation may not be possible if hand shake is excessive, or under the following condi- tions:
•When shooting subjects with vertical or horizontal stripes.
•When shooting dark or dim subjects.
•When shooting subjects with excessive backlighting.
•When shooting scenes with movement in various directions.
•When shooting scenes with
●Switch off the Picture Stabilizer when recording with the camcorder on a tripod.
●The “ ” indicator appears blinking if the Stabilizer cannot be used.
FEATURE: 5Sec. Rec (5-sec. Recording)
PURPOSE:
To record a scene for 5 seconds, providing quick scene transitions like those seen in TV programmes.
OPERATION:
1)During
2)Press the Recording Start/Stop Button. Recording starts, and after
■To cancel the 5Sec. Rec. function, press 5SEC. REC again so that “ 5S” disappears.
NOTE:
Fade/Wipe ( ☞ pg. 19) cannot be activated by pressing 5SEC. REC.