JVC GR-SXM760A specifications 10 EN, Recording Mode Setting, Tape Length Setting

Set the Power Switch to “PRO.”, then press MENU.

10 EN

GETTING STARTED (cont.)

Recording Mode Setting

Set depending on your preference.

System

Select Switch

Select Wheel

SP/LP Recording

Mode Button

Power Switch

1 Set the System Select Switch to “VIDEO”, then set the Power Switch to “AUTO” or “PRO.”. Press SP/LP for more than 1 second. “SP” (Standard Play) provides higher picture and sound quality and is better for dubbing, while “LP” (Long Play) is more economical, providing twice the recording time.

NOTES:

●If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

●S-VHS/S-VHS ET recording is not possible when the recording mode is set to “LP” (
pg. 11, 28).

			MENU Button
	Viewfinder
SP			T 3 0	Tape length indicator
				Recording mode
				indicator
	Display
TE L E MACRO		OF F
TAPE LENGTH				Menu Screen
		T 3 0
		STANDARD
P I CTURE
SNAPSHOT		FUL L
4RETURN
	TAPE L ENGTH			TAPE LENGTH
T 3 0				Setting Menu
T 4 5
T 5 0
T 6 0
EX I T
TE L E MACRO		OF F
TAPE LENGTH		T 4 5
P I CTURE		STANDARD
SNAPSHOT		FUL L

4RETURN

Tape Length Setting

Set the tape length according to the length of the tape used.

1

2 Rotate the Select Wheel to move the highlight bar to “TAPE LENGTH”, then press it. The TAPE LENGTH Setting Menu appears.

3 Rotate the Select Wheel to move the highlight bar to the correct tape length setting. T30=30 minutes of recording time, T45=45 minutes, T50=50 minutes and T60=60 minutes.

•To return to the previous setting, rotate the Select Wheel to move the highlight bar to “EXIT”.

4 Press the Select Wheel. The Menu Screen reappears with the highlight bar on “RETURN”. Press the Select Wheel again to close the Menu Screen.

NOTE:

The tape remaining time (
pg. 14) displayed in the viewfinder is correct only if the correct tape length has been selected.