46 EN | D.S.C. PLAYBACK Advanced Features (cont.) |
| Delete |
System
Select Switch
Select Wheel
Power Switch
MENU Button
Display
DE LET E | DELETE Menu |
SE LECT
AL L
In case of “ALL”
When the memory in which still images are stored becomes full, the number of remaining shots available reaches “0” (blinking). In this situation it becomes impossible to take your next shot. Delete some still images already stored in memory to make room for new shots.
1 Set the System Select Switch to “D.S.C.”, and set the Power Switch to “PLAY”.
2 Press MENU. The Menu Screen appears.
3 Rotate the Select Wheel to move the highlight bar to “DELETE”, and press it. The DELETE Menu appears.
4 Rotate the Select Wheel to move the highlight bar to “SELECT” or “ALL”, then press it.
To select a still image by checking the still images stored in memory . . .
.... select “SELECT”. The Delete Select Menu
appears. Go to step 5.
To delete all the still images stored in memory at once without checking them . . .
.... select “ALL”. The Delete Execute Menu appears.
EX I T |
|
|
N E X T < DELETE > |
| |
0 1 | 02 |
|
04 | 05 | 06 |
| DE LET E |
|
CANCEL
ENTER
Delete Select Menu
In case of “SELECT”
Delete Execute Menu
Go to step 6.
To quit the Delete Mode . . .
.... rotate the Select Wheel to place the highlight bar
on “EXIT”, then press it twice.
5 Rotate the Select Wheel to move the frame to the desired still image, then press it. “ 
” appears above the selected still image. When you have finished selecting all the desired still images, rotate the Select Wheel upward to place the highlight bar on “NEXT”, then press the Select Wheel.
•On the Delete Select Menu, the still images are displayed six at a time. To delete the still images that follow the 6th one, rotate the Select Wheel to move the frame from No. 1 to No. 6, then rotate it further downward. The frame is moved to the 7th still image automatically. Perform the same
EX I T
procedure for still images that follow the 7th one.