JVC GR-SXM760A specifications 22 EN, Feature Quick Review for scenes recorded onto a tape

22 EN

RETAKE (2/3)

Button

Stop (5) Button

Play/Pause (4/6) Button

RECORDING Basic Features (cont.)

FEATURE: Quick Review (for scenes recorded onto a tape)

PURPOSE:

To check the end of the last recording.

OPERATION:

1)Set the System Select Switch to “VIDEO”, then set the Power Switch to “CAMERA” (“AUTO” or “PRO.”).

2)Press 2and release quickly during the Record– Standby mode.

Tape is rewound for approx. 1 second and played back automatically, then pauses in Record–Standby mode for the next shot.

NOTE:

Distortion may occur at the start of playback. This is normal.

FEATURE: Quick Review (for still images stored in the built-in memory)

PURPOSE:

To check the still image most recently stored in the built-in memory.

OPERATION:

1)Set the System Select Switch to “D.S.C.”, then set the Power Switch to “CAMERA” (“AUTO” or “PRO.”).

2)Press 2and release quickly.

The still image is displayed for approx. 3 seconds. The message “DELETE OK? PRESS PLAY BUTTON” appears.

To remove the still image you have checked (Instant Delete) . . .

1)Press 4/6. The still image is deleted. To cancel, press 5.

FEATURE: Retake

PURPOSE:

To re-record certain segments.

OPERATION:

1)Make sure the camcorder is in the Record–Standby mode.

2)Press and hold either RETAKE to reach the start point for new recording. Pressing 3forwards the tape and pressing 2reverses it.

3)Press the Recording Start/Stop Button to start recording.

NOTE:

Noise bars appear and pictures may become monochrome or darken during Retake. This is normal.