JVC GY-HD200E manual Displaying Time Code, Displaying the Time and Date on the Screen, Setting

Page 24

PREPARATIONS FOR OPERATION

Setting and Displaying the Date and Time (Cont’d)

Setting the Date and Time

1.Display the CLOCK ADJUST menu screen.

Select the CLOCK ADJUST item on the TIME/DATE menu screen.

TIME/DATE menu screen

2.Set the date and time.

The blinking digit is the one to be set.

Displaying the Time and Date on the Screen

Whether or not the time and date should be displayed on the screen and how to display them are set on the TIME/DATE menu screen.

Date Time

1.Display the TIME/DATE menu screen.

1Select the TC/UB/CLOCK item on the TOP MENU screen.

2Select the TIME/DATE item on the TC/UB/CLOCK menu screen.

2.Set the TIME/DATE menu screen.

• DISPLAY item : Sets whether or not date and time should be displayed.

Displaying Time Code

This device records SMPTE-standard (NTSC) or EBU-stan- dard (PAL) time codes and user’s bits. In the play mode or the record mode, the reproduced time codes or user’s bits are shown on the LCD monitor or in the viewfinder.

The time codes or user’s bits can be shown on the LCD mon- itor or in the viewfinder during playback and recording as fol- lows. (Status screen)

Setting

1.Set the TC/UB item on the LCD/VF[3/4] menu screen to ON.

•Time codes or user’s bit data are displayed on the STATUS screen.

Time code indication

(Example)

Time code indication

00:00:00:00

User’s bits indication

FF EE DD 20

Time code input entered the IEEE1394 connector (GY-HD200U/ GY-HD201E only)

Pressing the STOP button for 1 second in the EJECT or stop mode displays the DV input time code data or user’s bit data from the IEEE1394 connector on the STATUS screen.

DTCG : The time code data from the IEEE1394 connector

DUBG : The user’s bit data from the IEEE1394 connector

To return to display of the original time code or user’s bit, press the STOP button. (Display of the normal time code or user’s bit is also restored by performing VTR operation.)

MEMO

•To record HDV/DV input time code and user’s bit from the IEEE1394 connector, set the TC DUPLI. item on the TC/UB/CLOCK menu screen to ON.

X See page 90.

•To maintain the continuity of time code data, use with the TC GENE. switch set to REGEN mode when recording HDV/DV input signal from the IEEE1394 connector.

•There is no time code display for HDV input.

CAUTION

A time code with a duration of more than 2 hours may not

Date

CLOCK ADJUST menu screen

Set to ON to display the indications.

• DISPLAY MODE : Sets the video output mode in

itemwhich date and time should be dis- played.

be displayed correctly by DV components for general con- sumer use, as some of these lack the capability to display longer time codes.

Time (Hour:Min)

1When the SHUTTER dial is pressed, the blinking digit moves to the next digit.

2When the SHUTTER dial is rotated, the value of the blinking digit changes.

When the SHUTTER dial is rotated upward, the value becomes higher. When rotated downward, the value becomes smaller.

3Repeat the procedure described in 1 and 2 above to set the day, month, year, hours, minutes.

The digits indicating seconds cannot be set.

4Press the SHUTTER dial in sync with a time signal to enter the date and time precisely.

3.When all the settings are completed, rotate the SHUT- TER dial to align the cursor with the PAGE BACK item, and then press the SHUTTER dial.

• The TIME/DATE menu screen returns.

4.To return to the normal screen, use either of the following methods.

Press the STATUS button or

Return to the TOP MENU screen and then select the EXIT item on the TOP MENU screen before pressing the SHUTTER dial.

BARS

: Displayed when outputting the color

 

bar.

CAM

: Displayed when outputting the color

 

camera image.

BARS+CAM

: Date and time are always displayed.

• DISPLAY

: Sets the style in which the date and

STYLE item

time are displayed.

DATE+TIME

: Date and time are displayed.

DATE

: Date only is displayed.

TIME

: Time only is displayed.

„Display of date and time in the various operation modes.

In Camera mode

: The date and time of the internal

 

clock are displayed.

In VTR playback mode : The date and time recorded on the tape are displayed.

In VTR stop mode

: The last read date and time values

 

are displayed.

When an HDV/DV sig- : The date and time of the DV input nal is input from the are displayed in DV format. The IEEE1394 connector date and time of the internal clock

are displayed in HDV format. (GY-HD200U/GY-HD201E only)

STATUS 1 screen

2.Whether time codes or user’s bit data should be dis- played is selected with the TC DISPLAY switch inside the LCD door.

TC

: Time codes are displayed.

UB

: User’s bit data is displayed.

 

LCD BRIGHT

CAM/VTR

 

-

+

 

 

 

AUDIO SELECT

TC

 

CH-1

CH-2 DISPLAY

GENE.

 

AUTO

TC

FREE

 

MANU

UB

REC

 

 

 

REGEN

 

TC DISPLAY switch

TC GENE. switch

42

43

Page 23 Page 25
Image 24
Page 23 Page 25
Contents GY-HD200U/CHU Instructions GY-HD200E/CHE GY-HD201E/CHE For Customer UseImportant Safeguards Safety PrecautionsRemarque Safety Precautions Cont’d This symbol is only valid in the European UnionInformation for Users on Disposal of Old Equipment European UnionFor DC ×2/Earphone SeeSee pages 12, 36 SD memory card SeeContents Precautions for Proper Use Routine and Periodical MaintenancePrecautions for Use of Head Cleaning Tape Head CleaningBattery Pack to be Used Characteristic CCD Phe- nomenaCondensation Videocassette to be UsedZoom Lens Front SectionTh16 × 5.5BRMU MemoRear Section LCD DoorRight Side Section Left Side Section Top Section Recording and Image Out- put Formats Status Screens in the Camera Mode Setting Status Contents of IndicationsIndications on the LCD Monitor and in the View- finder Status ScreensContents Indications on the LCD Monitor and in the Viewfinder Cont’dIndication Indication Contents Magnified Status Indications on LCD Monitor NDFAlarm Message Display Switching between the LCD Screen and Viewfinder DisplayMenu Setting Screen Safety Zone Indication Camera mode onlyHow to Attach the View- finder Basic System Attaching the Zoom LensAttaching the Microphone Provided Attaching the Tripod Base Optional Inserting an SD Memory CardBattery Operation AC OperationTurning the Power on Setting and Displaying Loading/Unloading the CassetteDate and Time Setting Displaying Time CodeDisplaying the Time and Date on the Screen Presetting and Recording of Time Code SettingPresetting time code data Presetting user’s bit dataPresetting User’s Bit Aborting Preset OperationAbout Time Code Mode Playing Back Time CodeScreen Adjustment Viewfinder AdjustmentBack Focus Adjustment White Balance AdjustmentWhite Balance Adjustment Full Auto White Balance FAWWhite Shading Adjustment Setting the Video FormatSetting the Frame Rate Item Setting the REC ItemCamera Settings Audio Input Signal Selec- tionScreen Size 43/169 Mode Selection Audio Input Signal Selection Cont’d Basic Recording Opera- tionMonitoring Audio during Recording About the Focus Assist FunctionIf the Record-Standby Mode Contin- ues Record-Standby or Stop modeFunction/Initial Setting Header REC FunctionPlayback Procedure SearchHeader REC Function Executing the Header REC FunctionConnecting the Video Signal CablesConnecting the IEEE1394 Cable Displaying AlarmsDubbing with AV Devices HDV/DV DubbingBackup Recording SettingsHDV/DV Dubbing Cont’d OFFRemote Control Unit Functions List Shutter Speed in 24p ModeConnect a Remote Con- trol Unit RM-LP55/RM- LP57 ConnectionMenu Screen Configura- tion Setting Menu Screens TOP Menu ScreenFunction/Setting bold characters indicate initial settings Setting DescriptionVideo FORMAT1/2 Menu Screen Frame RateInitial settings U model 7.5% E model 0.0% Video FORMAT2/2 Menu ScreenMenu Screen AutoMiddle HighNormal 108%Standard StopSwitch Mode Menu Screen Switch Mode menu screen is only displayed in camera modeREC Item Setting for Step Setting for Variable White Balance Menu ScreenAUDIO/MIC1/2 Menu Screen AUDIO/MIC2/2 Menu ScreenMIX LCD/VF2/4 menu screen can only be set in camera mode LCD/VF1/4 Menu ScreenLCD/VF2/4 Menu Screen 70-80%Screen is displayed in the VTR mode LCD/VF3/4 Menu ScreenLCD/VF4/4 Menu Screen Disable TC/UB/CLOCK Menu ScreenHeader REC Menu Screen DropTIME/DATE Menu Screen OTHERS1/2 Menu ScreenOTHERS2/2 Menu Screen 1394Loading a menu settings file Saving settingsError displays File Manage Menu ScreenHow to Use Skin Detail Initializing formatting an SD mem- ory cardRotate How to Use Skin Detail Cont’d Using the Skin Detail FunctionOutputting Color Bars Display Status Action Error Code Error Details This device Operation Remedy Blinking Pattern Remaining Battery/TapeTroubleshooting How to Display the Hour MeterSymptoms Remedy Specifications External Dimensions unit mmHDV GY-HD251 Important Safeguards Safety PrecautionsRemarque Port Cable Length HD251CHE See Provided only for U modelContents Precautions for Proper Use Routine and Periodical MaintenancePrecautions for Use of Head Cleaning Tape Battery Pack to be Used Characteristic CCD Phe- nomenaCondensation Videocassette to be UsedZoom Lens Front SectionIris A/R Input GND4TC GENE. Time code generator setting switch Setting, the time code always operatesAccording to the input level. When excessive Rear SectionBGAIN Sensitivity selector switch PresetRight Side Section EREC REC trigger button start/stop recordingLeft Side Section RCATop Section Recording and Image Out- put Formats IeeeRecording Composite Indications on the LCD Monitor and in the View- finder Indications on the LCD Monitor Viewfinder Cont’dFilter OFF ND1 ND2File Full Auto ON, OFF GainEXT NDFSafety Zone Safety Zone OFFCenter Mark OFF DV-24PAHow to Attach the View Basic System Attaching the Zoom LensFinder Attaching the Microphone ProvidedInserting an SD Memory Card SDHC-compliant memory cards cannot be used with this deviceBattery Operation AC Operation„GY-HD250U „GY-HD251ETurning the Power on Setting and Displaying Loading/Unloading the CassetteDate and Time VTRTime code input entered the IEEE1394 connector Displaying Time CodeDisplayed Time Code/User’s Bit Time codes are displayedPresetting and Recording of Time Code Continual time codes across different scenesTime code starts to run from the time it is Time code generator’s running method isPresetting the Time Code from the LCD Screen Playing Back Time CodeInternal Free REC Regen InternalBlinks when the time code cannot be synchronized Slave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111EExternal TC OUTScreen Adjustment Viewfinder Adjustment Back Focus AdjustmentAdjusted Adjust the position and angle of the viewfinder White Balance Adjustment White Shading AdjustmentSet the ND filter switch according to the current lighting When correct white balance is obtained, the approximateSetting the Video Format Camera SettingsScreen Size 43/169 Mode Selection ND FilterAudio Input Signal Selec- tion Basic Recording Opera- tion How to set the Header REC menu screen Header REC FunctionPlayback Procedure Outputting AudioFast-Forward, Rewind SearchConnecting the Video Signal CablesRecording Composite Video Signals from an External Device Status Screen Display on the LCD Screen or ViewfinderUsing Genlock Func- tions Synchronized SignalsAdjust SC and H Phase Dubbing with AV DevicesHDV/DV Dubbing Backup Recording Connect a Remote Con- trol Unit RM-LP55/RM- LP57Menu Screen Configura- tion Connect a Remote Control Unit RM-LP55/RM-LP57 Cont’dSetting Menu Screens Menu Screen Configuration Cont’dTOP Menu Screen Video FORMAT1/2 Menu ScreenOFF ExecuteVideo FORMAT2/2 Menu Screen Video FORMAT1/2 Menu Screen Cont’dMenu Screen 3200KMiddle HighNormal 108%Standard Preset White Balance Menu ScreenStop Switch Mode Menu Screen AUDIO/MIC1/2 Menu ScreenStep NoneAUDIO/MIC2/2 Menu Screen LCD/VF1/4 Menu ScreenMIX BlueLCD/VF2/4 Menu Screen LCD/VF3/4 Menu ScreenVoltage SECLCD/VF4/4 Menu Screen TC/UB/CLOCK Menu ScreenColor InternalHeader REC Menu Screen TIME/DATE Menu ScreenOTHERS1/2 Menu Screen OTHERS2/2 Menu Screen3MIN BlinkGenlock Menu Screen OTHERS2/2 Menu Screen Cont’d100 101 File Manage Menu ScreenHow to Use Skin Detail If you want to change the range of colors recognized withSkin color detection function, follow the steps below 104 105 Outputting Color BarsNo DV Signal No HDV SignalSwitch Switch to VTRError Code Error Details GY-HD250/GY-HD251 Remedy Operation Troubleshooting How to Display the Hour MeterRGB? Specifications AUX inputGenlock input HD/SD SDI outputCorrection
Top Page Image Contents