JVC GY-HD200CHE Playing Back Time Code, Presetting the Time Code from the LCD Screen, Internal

Page 83

PREPARATIONS FOR OPERATION

Presetting the Time Code from the LCD Screen

The time code can be preset directly from the LCD screen without opening the TC/UB/CLOCK menu screen.

CAUTION

PRESET mode is not available in the following.

•TCG SOURCE item in the TC/UB/CLOCK menu screen is set to EXTERNAL.

•TC GENE. switch is set to REGEN.

•TC DUPLI. item in the TC/UB/CLOCK menu screen is set to ON.

•Menu screen is displayed.

•RECORDING mode is active.

•Switching to CAM/VTR mode (When VTR indicator is blinking).

Blink

2.Press the USER2 button to reset all data.

•Data becomes “00:00:00:00” and the hour digit starts blinking.

3.Set the time code (hour, minute, second and frame). The blinking digit can be set.

1Turn the SHUTTER dial to change the value of the blinking digit. Turn the SHUTTER dial up to increase the value and down to decrease the value.

Recording Time Codes in Continuation of Time Codes Recorded on Tape

The GY-HD250/GY-HD251 also incorporates a time code reader. Therefore, when this device enters record mode from record-standby mode, it can read the time code data recorded on the tape and record time codes in continuation of the existing data.

The recorded user’s bit data are identical to the user’s bit date recorded on tape.

*However, approximately ±1-frame variations may occur in scene accuracy.

To enable this function, set the time code related switches as follows before starting recording.

Setting

Playing Back Time Code

This device features a time code reader. During playback, the time code or user’s bit data recorded on the tape is dis- played on the LCD screen or viewfinder status screen.

•When the [PB/PR/TC] switch is set to TC, the playback time code is output from the [PB/TC OUT] terminal (Only in VTR mode).

•When HD/SD-SDI OUT of the VIDEO FORMAT[2/2] menu screen is set to ON, the playback time code is output from the [HD/SD-SDI] terminal.

MEMO

•

During playback, if a portion of tape without recording

 

time code runs through, the time code stops running.

 

Playback continues.

•

When a tape with a time code that is longer than two

Setting

„TC/UB/CLOCK menu screen

•Set TCG SOURCE to INTERNAL.

•Set framing of the time code generator in DROP FRAME. (When set to FRAME RATE 60/30)

•Set to enable/disable user’s bit recording in UB REC. (When set to FRAME RATE 50/25)

„Set the TC GENE switch to REC or FREE.

MEMO

See page 44 for details on the above settings.

„Set the TC DISPLAY switch.

Set to TC to preset time code and UB to preset user’s bit.

2Press the SHUTTER dial to change the blinking digit.

3Repeat steps 1 and 2 and continue setting for each row.

4.Press the USER3 button to confirm the setting data.

• The LCD screen returns to the original screen.

Presetting User’s Bit

You can specify the user’s bit with a number or character between 0 - F.

CAUTION

All digits of user’s bit cannot be set to F.

If all digits are set to F and read, user’s bit is deemed as undefined during playback.

• Set TCG SOURCE on the TC/UB/CLOCK menu screen to

 

INTERNAL.

•

Set the TC GENE. switch inside the LCD door to REGEN.

•

Set TC DUPLI. item on the TC/UB/CLOCK menu screen

 

to OFF.

MEMO

The time code framing mode automatically becomes the mode (drop frame or non drop frame) already recorded on the tape.

About Time Code Mode „ Camera mode

TC/UB/CLOCK menu

TC GENE. switch

hours is played on home-use DV equipment, time code

may not be played properly on some models.

Operation

This section describes presetting of the time code.

USER 2 button

USER 1 button

USER 3 button

USER 1

USER 2 USER 3

 

SHUTTER

ND FILTER

SHUTTER dial

2

 

1

 

OFF

MENU

 

 

STATUS button

 

STATUS

1.In Standby or Stop mode, press the USER1 button for about 2 seconds while holding down the STATUS button.

•The current time code generator data is displayed in enlarged display mode on the LCD screen. The hour digit starts blinking.

Aborting Preset Operation

While presetting, press the USER1 button while holding down the STATUS button.

•Preset operation stops and the LCD screen returns to the original screen.

CAUTION

„Preset operation is terminated in the following.

•TC DISPLAY switch is changed

•CAM/VTR mode switch is changed

•VTR operations are performed

„USER1, USER2, and USER3 presetting in the SWITCH MODE menus screen is not available when the Time Code Preset screen is displayed.

„The time code preset screen is displayed on the LCD screen or viewfinder. It will not be output from the VIDEO OUT terminal.

TCG SOURCE item

FREE

REC

REGEN

INTERNAL

TC PRESET mode

TC REGENE mode

EXTERNAL

 

EXT TC mode

„ VTR mode/IEEE1394 input mode

TC/UB/CLOCK menu

 

 

TC GENE. switch

 

TCG SOURCE item

TC DUPLI. item

FREE

 

REC

REGEN

INTERNAL

OFF

IEEE1394 TC

 

TC PRESET mode

TC REGENE mode

ON

SLAVE mode*

 

IEEE1394 TC DUPLI. mode

 

 

EXTERNAL

OFF

 

 

EXT TC mode

 

ON

 

 

 

 

 

 

 

 

*IEEE1394 TC SLAVE mode is performed with special operations. X See page 48.

46

47

Page 82 Page 84
Image 83
Page 82 Page 84
Contents For Customer Use GY-HD200U/CHU Instructions GY-HD200E/CHE GY-HD201E/CHERemarque Important SafeguardsSafety Precautions European Union Safety Precautions Cont’dThis symbol is only valid in the European Union Information for Users on Disposal of Old EquipmentSD memory card See For DC ×2/EarphoneSee See pages 12, 36Contents Head Cleaning Precautions for Proper UseRoutine and Periodical Maintenance Precautions for Use of Head Cleaning TapeVideocassette to be Used Battery Pack to be UsedCharacteristic CCD Phe- nomena CondensationMemo Zoom LensFront Section Th16 × 5.5BRMULCD Door Rear SectionRight Side Section Left Side Section Top Section Recording and Image Out- put Formats Status Screens Status Screens in the Camera ModeSetting Status Contents of Indications Indications on the LCD Monitor and in the View- finderIndications on the LCD Monitor and in the Viewfinder Cont’d ContentsIndication Indication Contents NDF Magnified Status Indications on LCD MonitorSafety Zone Indication Camera mode only Alarm Message DisplaySwitching between the LCD Screen and Viewfinder Display Menu Setting ScreenAttaching the Microphone Provided How to Attach the View- finderBasic System Attaching the Zoom Lens Inserting an SD Memory Card Attaching the Tripod Base OptionalAC Operation Battery OperationTurning the Power on Date and Time Setting and DisplayingLoading/Unloading the Cassette Displaying the Time and Date on the Screen SettingDisplaying Time Code Presetting user’s bit data Presetting and Recording of Time CodeSetting Presetting time code dataPlaying Back Time Code Presetting User’s BitAborting Preset Operation About Time Code ModeViewfinder Adjustment Screen AdjustmentFull Auto White Balance FAW Back Focus AdjustmentWhite Balance Adjustment White Balance AdjustmentSetting the REC Item White Shading AdjustmentSetting the Video Format Setting the Frame Rate ItemScreen Size 43/169 Mode Selection Camera SettingsAudio Input Signal Selec- tion About the Focus Assist Function Audio Input Signal Selection Cont’dBasic Recording Opera- tion Monitoring Audio during RecordingHeader REC Function If the Record-Standby Mode Contin- uesRecord-Standby or Stop mode Function/Initial SettingExecuting the Header REC Function Playback ProcedureSearch Header REC FunctionDisplaying Alarms Connecting the VideoSignal Cables Connecting the IEEE1394 CableHDV/DV Dubbing Dubbing with AV DevicesOFF Backup RecordingSettings HDV/DV Dubbing Cont’dConnection Remote Control Unit Functions ListShutter Speed in 24p Mode Connect a Remote Con- trol Unit RM-LP55/RM- LP57Menu Screen Configura- tion TOP Menu Screen Setting Menu ScreensFrame Rate Function/Setting bold characters indicate initial settingsSetting Description Video FORMAT1/2 Menu ScreenAuto Initial settings U model 7.5% E model 0.0%Video FORMAT2/2 Menu Screen Menu Screen108% MiddleHigh NormalStop StandardWhite Balance Menu Screen Switch Mode Menu ScreenSwitch Mode menu screen is only displayed in camera mode REC Item Setting for Step Setting for VariableMIX AUDIO/MIC1/2 Menu ScreenAUDIO/MIC2/2 Menu Screen 70-80% LCD/VF2/4 menu screen can only be set in camera modeLCD/VF1/4 Menu Screen LCD/VF2/4 Menu ScreenLCD/VF4/4 Menu Screen Screen is displayed in the VTR modeLCD/VF3/4 Menu Screen Drop DisableTC/UB/CLOCK Menu Screen Header REC Menu ScreenOTHERS1/2 Menu Screen TIME/DATE Menu Screen1394 OTHERS2/2 Menu ScreenFile Manage Menu Screen Loading a menu settings fileSaving settings Error displaysRotate How to Use Skin DetailInitializing formatting an SD mem- ory card Outputting Color Bars How to Use Skin Detail Cont’dUsing the Skin Detail Function Display Status Action Blinking Pattern Remaining Battery/Tape Error Code Error Details This device Operation RemedySymptoms Remedy TroubleshootingHow to Display the Hour Meter HDV SpecificationsExternal Dimensions unit mm GY-HD251 Remarque Important SafeguardsSafety Precautions Port Cable Length See Provided only for U model HD251CHEContents Precautions for Use of Head Cleaning Tape Precautions for Proper UseRoutine and Periodical Maintenance Videocassette to be Used Battery Pack to be UsedCharacteristic CCD Phe- nomena CondensationGND Zoom LensFront Section Iris A/R InputRear Section 4TC GENE. Time code generator setting switchSetting, the time code always operates According to the input level. When excessiveEREC REC trigger button start/stop recording BGAIN Sensitivity selector switchPreset Right Side SectionRCA Left Side SectionTop Section Recording Composite Recording and Image Out- put FormatsIeee Indications on the LCD Monitor and in the View- finder Viewfinder Cont’d Indications on the LCD MonitorFull Auto ON, OFF Gain Filter OFF ND1ND2 FileNDF EXTDV-24PA Safety ZoneSafety Zone OFF Center Mark OFFAttaching the Microphone Provided How to Attach the ViewBasic System Attaching the Zoom Lens FinderSDHC-compliant memory cards cannot be used with this device Inserting an SD Memory Card„GY-HD251E Battery OperationAC Operation „GY-HD250UTurning the Power on VTR Setting and DisplayingLoading/Unloading the Cassette Date and TimeTime codes are displayed Time code input entered the IEEE1394 connectorDisplaying Time Code Displayed Time Code/User’s BitTime code generator’s running method is Presetting and Recording of Time CodeContinual time codes across different scenes Time code starts to run from the time it isFree REC Regen Internal Presetting the Time Code from the LCD ScreenPlaying Back Time Code InternalTC OUT Blinks when the time code cannot be synchronizedSlave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111E ExternalAdjusted Adjust the position and angle of the viewfinder Screen Adjustment Viewfinder AdjustmentBack Focus Adjustment When correct white balance is obtained, the approximate White Balance AdjustmentWhite Shading Adjustment Set the ND filter switch according to the current lightingND Filter Setting the Video FormatCamera Settings Screen Size 43/169 Mode SelectionAudio Input Signal Selec- tion Basic Recording Opera- tion Header REC Function How to set the Header REC menu screenSearch Playback ProcedureOutputting Audio Fast-Forward, RewindStatus Screen Display on the LCD Screen or Viewfinder Connecting the VideoSignal Cables Recording Composite Video Signals from an External DeviceDubbing with AV Devices Using Genlock Func- tionsSynchronized Signals Adjust SC and H PhaseHDV/DV Dubbing Connect a Remote Con- trol Unit RM-LP55/RM- LP57 Backup RecordingConnect a Remote Control Unit RM-LP55/RM-LP57 Cont’d Menu Screen Configura- tionMenu Screen Configuration Cont’d Setting Menu ScreensExecute TOP Menu ScreenVideo FORMAT1/2 Menu Screen OFFVideo FORMAT1/2 Menu Screen Cont’d Video FORMAT2/2 Menu ScreenHigh Menu Screen3200K MiddleStandard Normal108% Stop PresetWhite Balance Menu Screen None Switch Mode Menu ScreenAUDIO/MIC1/2 Menu Screen StepBlue AUDIO/MIC2/2 Menu ScreenLCD/VF1/4 Menu Screen MIXSEC LCD/VF2/4 Menu ScreenLCD/VF3/4 Menu Screen VoltageInternal LCD/VF4/4 Menu ScreenTC/UB/CLOCK Menu Screen ColorTIME/DATE Menu Screen Header REC Menu ScreenBlink OTHERS1/2 Menu ScreenOTHERS2/2 Menu Screen 3MINOTHERS2/2 Menu Screen Cont’d Genlock Menu ScreenFile Manage Menu Screen 100 101Skin color detection function, follow the steps below How to Use Skin DetailIf you want to change the range of colors recognized with Outputting Color Bars 104 105Switch to VTR No DV SignalNo HDV Signal SwitchError Code Error Details GY-HD250/GY-HD251 Remedy Operation RGB? TroubleshootingHow to Display the Hour Meter HD/SD SDI output SpecificationsAUX input Genlock inputCorrection
Top Page Image Contents