JVC GY-HD200CHE White Shading Adjustment, Setting the Video Format, Setting the Frame Rate Item

Page 29

PREPARATIONS FOR OPERATION

SETTING AND ADJUSTMENTS BEFORE SHOOTING

White Shading Adjustment

It is necessary to perform this adjustment to the camera when attaching a lens that is different from the previously attached lens.

Setting in the WHITE BALANCE screen is performed as fol- lows.

„Selecting an item

Turn the SHUTTER dial to align the cursor (j) with the desired item, and press the SHUTTER dial.

• The item is selected and the setting value blinks.

„ Changing the setting value

Turn the SHUTTER dial to change the blinking value. When

the SHUTTER dial is pressed, the value stops blinking and

Setting the Video Format

Set the video format using the FRAME RATE item and the REC item on the VIDEO FORMAT menu screen.

4.Turn the SHUTTER dial, change the setting and push the SHUTTER dial.

•The setting stops flashing and is temporarily set.

•Move the cursor (K) to the EXECUTE item and EXE- CUTE flashes.

5.Push the SHUTTER dial.

•“REBOOT! SYSTEM CHANGE” is displayed on the screen and after a few seconds the system is reboo- ted.

Even if white balance is achieved in the middle of the screen, it may not be achieved at the top and bottom of the screen. Greens and magentas may be colored. This is due to char- acteristics of the lens. Correcting this phenomenon is called White Shading Adjustment.

Perform this after adjusting white balance.

White shading adjustment is performed on the WHITE BAL- ANCE menu screen.

Adjustment procedure

1.White balance the camera.

2.Set the camera’s lens controls as follows:

a.Set the IRIS opening to F4 or higher number.

b.In the case of a zoom lens set the ZOOM at the center of its range.

3.Shoot a uniformly lit white sheet of paper and fill the mon- itor screen with it.

4.Set the monitor CHROMA level to maximum.

5.Check the color of the monitor screen. If the top and the bottom of the monitor screen are white then no adjust- ment is necessary. If the top of the monitor screen is greenish and the bottom is reddish or if the top is reddish and the bottom is greenish then continue with this adjust- ment.

6.Adjust the LEVEL G in the SHADING menu item to mini- mize the color difference between the top and bottom of the screen.

7.It is recommended that only LEVEL G be adjusted.

1Display the WHITE BALANCE menu screen.

Follow the steps in “Setting Menu Screens” on page 72 and proceed as follows.

MENUrCAMERA PROCESS[1/2]rCAMERA PRO- CESS[2/2]rADVANCE PROCESSrWHITE BALANCE

the setting is changed.

2Perform the above steps to set SHADING to MANUAL.

3Select LEVEL R, LEVEL G, LEVEL B and press the SHUTTER dial.

•The setting value for the selected LEVEL blinks and becomes available for changing.

4Change the setting values for LEVEL R, LEVEL G, and LEVEL B with the SHUTTER dial while referring to the monitor.

When setting values are increased, colors at the bottom of the screen are suppressed and the top is enhanced. LEVEL R: Adjusts reds.

LEVEL G: Adjusts greens.

LEVEL B: Adjusts blues.

<Range: -128 to +127>

5Press the SHUTTER dial after changing the setting val- ues to save in the memory.

6Press the STATUS button to return to the normal screen.

8.When white shading adjustment is completed, adjust white balance again.

X See “White Balance Adjustment” on page 51.

CAUTION

•If the lens setup is incorrect, the white shading adjust- ment might result in over compensation. When perform- ing this adjustment, set the lens to the recommended settings. Do not open the lens IRIS beyond F4; do not set a telephoto lens to its extreme wide position or tele- photo position.

•White shading occurs due to the optical characteristics of the mounted lens, it is not a camera malfunction.

Setting the FRAME RATE Item

1.Press the STATUS button for at least 1 second.

• The TOP MENU screen is displayed.

SHUTTER dial

USER 1

USER 2

USER 3

SHUTTER

ND FILTER

2

1

MENU

STATUS

STATUS button

2.Turn the SHUTTER dial and bring the cursor (K) to the VIDEO FORMAT.. item and press the SHUTTER dial.

• The VIDEO FORMAT[1/2] menu screen is displayed.

3.Turn the SHUTTER dial and bring the cursor (K) to the FRAME RATE item and press the SHUTTER dial.

•The setting for the selected item flashes and can be changed.

“CHANGE THE SYSTEM” is displayed on the screen.

Setting the REC Item

Set the REC item using the same steps as for the FRAME RATE item.

MEMO

•If you change the FRAME RATE item setting, the system is rebooted.

•The synchronous video signal is momentarily disturbed when the REC item setting is switched.

•We recommend the following settings for REC item (in HDV format).

When recording images with a lot of motion: Set to HDV60p or HDV50p

When recording images with little motion: Set to HDV30p or HDV25p

52

53

Page 28 Page 30
Image 29
Page 28 Page 30
Contents For Customer Use GY-HD200U/CHU Instructions GY-HD200E/CHE GY-HD201E/CHERemarque Important SafeguardsSafety Precautions This symbol is only valid in the European Union Safety Precautions Cont’dInformation for Users on Disposal of Old Equipment European UnionSee For DC ×2/EarphoneSee pages 12, 36 SD memory card SeeContents Routine and Periodical Maintenance Precautions for Proper UsePrecautions for Use of Head Cleaning Tape Head CleaningCharacteristic CCD Phe- nomena Battery Pack to be UsedCondensation Videocassette to be UsedFront Section Zoom LensTh16 × 5.5BRMU MemoLCD Door Rear SectionRight Side Section Left Side Section Top Section Recording and Image Out- put Formats Setting Status Contents of Indications Status Screens in the Camera ModeIndications on the LCD Monitor and in the View- finder Status ScreensIndications on the LCD Monitor and in the Viewfinder Cont’d ContentsIndication Indication Contents NDF Magnified Status Indications on LCD MonitorSwitching between the LCD Screen and Viewfinder Display Alarm Message DisplayMenu Setting Screen Safety Zone Indication Camera mode onlyAttaching the Microphone Provided How to Attach the View- finderBasic System Attaching the Zoom Lens Inserting an SD Memory Card Attaching the Tripod Base OptionalAC Operation Battery OperationTurning the Power on Date and Time Setting and DisplayingLoading/Unloading the Cassette Displaying the Time and Date on the Screen SettingDisplaying Time Code Setting Presetting and Recording of Time CodePresetting time code data Presetting user’s bit dataAborting Preset Operation Presetting User’s BitAbout Time Code Mode Playing Back Time CodeViewfinder Adjustment Screen AdjustmentWhite Balance Adjustment Back Focus AdjustmentWhite Balance Adjustment Full Auto White Balance FAWSetting the Video Format White Shading AdjustmentSetting the Frame Rate Item Setting the REC ItemScreen Size 43/169 Mode Selection Camera SettingsAudio Input Signal Selec- tion Basic Recording Opera- tion Audio Input Signal Selection Cont’dMonitoring Audio during Recording About the Focus Assist FunctionRecord-Standby or Stop mode If the Record-Standby Mode Contin- uesFunction/Initial Setting Header REC FunctionSearch Playback ProcedureHeader REC Function Executing the Header REC FunctionSignal Cables Connecting the VideoConnecting the IEEE1394 Cable Displaying AlarmsHDV/DV Dubbing Dubbing with AV DevicesSettings Backup RecordingHDV/DV Dubbing Cont’d OFFShutter Speed in 24p Mode Remote Control Unit Functions ListConnect a Remote Con- trol Unit RM-LP55/RM- LP57 ConnectionMenu Screen Configura- tion TOP Menu Screen Setting Menu ScreensSetting Description Function/Setting bold characters indicate initial settingsVideo FORMAT1/2 Menu Screen Frame RateVideo FORMAT2/2 Menu Screen Initial settings U model 7.5% E model 0.0%Menu Screen AutoHigh MiddleNormal 108%Stop StandardSwitch Mode menu screen is only displayed in camera mode Switch Mode Menu ScreenREC Item Setting for Step Setting for Variable White Balance Menu ScreenMIX AUDIO/MIC1/2 Menu ScreenAUDIO/MIC2/2 Menu Screen LCD/VF1/4 Menu Screen LCD/VF2/4 menu screen can only be set in camera modeLCD/VF2/4 Menu Screen 70-80%LCD/VF4/4 Menu Screen Screen is displayed in the VTR modeLCD/VF3/4 Menu Screen TC/UB/CLOCK Menu Screen DisableHeader REC Menu Screen DropOTHERS1/2 Menu Screen TIME/DATE Menu Screen1394 OTHERS2/2 Menu ScreenSaving settings Loading a menu settings fileError displays File Manage Menu ScreenRotate How to Use Skin DetailInitializing formatting an SD mem- ory card Outputting Color Bars How to Use Skin Detail Cont’dUsing the Skin Detail Function Display Status Action Blinking Pattern Remaining Battery/Tape Error Code Error Details This device Operation RemedySymptoms Remedy TroubleshootingHow to Display the Hour Meter HDV SpecificationsExternal Dimensions unit mm GY-HD251 Remarque Important SafeguardsSafety Precautions Port Cable Length See Provided only for U model HD251CHEContents Precautions for Use of Head Cleaning Tape Precautions for Proper UseRoutine and Periodical Maintenance Characteristic CCD Phe- nomena Battery Pack to be UsedCondensation Videocassette to be UsedFront Section Zoom LensIris A/R Input GNDSetting, the time code always operates 4TC GENE. Time code generator setting switchAccording to the input level. When excessive Rear SectionPreset BGAIN Sensitivity selector switchRight Side Section EREC REC trigger button start/stop recordingRCA Left Side SectionTop Section Recording Composite Recording and Image Out- put FormatsIeee Indications on the LCD Monitor and in the View- finder Viewfinder Cont’d Indications on the LCD MonitorND2 Filter OFF ND1File Full Auto ON, OFF GainNDF EXTSafety Zone OFF Safety ZoneCenter Mark OFF DV-24PABasic System Attaching the Zoom Lens How to Attach the ViewFinder Attaching the Microphone ProvidedSDHC-compliant memory cards cannot be used with this device Inserting an SD Memory CardAC Operation Battery Operation„GY-HD250U „GY-HD251ETurning the Power on Loading/Unloading the Cassette Setting and DisplayingDate and Time VTRDisplaying Time Code Time code input entered the IEEE1394 connectorDisplayed Time Code/User’s Bit Time codes are displayedContinual time codes across different scenes Presetting and Recording of Time CodeTime code starts to run from the time it is Time code generator’s running method isPlaying Back Time Code Presetting the Time Code from the LCD ScreenInternal Free REC Regen InternalSlave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111E Blinks when the time code cannot be synchronizedExternal TC OUTAdjusted Adjust the position and angle of the viewfinder Screen Adjustment Viewfinder AdjustmentBack Focus Adjustment White Shading Adjustment White Balance AdjustmentSet the ND filter switch according to the current lighting When correct white balance is obtained, the approximateCamera Settings Setting the Video FormatScreen Size 43/169 Mode Selection ND FilterAudio Input Signal Selec- tion Basic Recording Opera- tion Header REC Function How to set the Header REC menu screenOutputting Audio Playback ProcedureFast-Forward, Rewind SearchSignal Cables Connecting the VideoRecording Composite Video Signals from an External Device Status Screen Display on the LCD Screen or ViewfinderSynchronized Signals Using Genlock Func- tionsAdjust SC and H Phase Dubbing with AV DevicesHDV/DV Dubbing Connect a Remote Con- trol Unit RM-LP55/RM- LP57 Backup RecordingConnect a Remote Control Unit RM-LP55/RM-LP57 Cont’d Menu Screen Configura- tionMenu Screen Configuration Cont’d Setting Menu ScreensVideo FORMAT1/2 Menu Screen TOP Menu ScreenOFF ExecuteVideo FORMAT1/2 Menu Screen Cont’d Video FORMAT2/2 Menu Screen3200K Menu ScreenMiddle HighStandard Normal108% Stop PresetWhite Balance Menu Screen AUDIO/MIC1/2 Menu Screen Switch Mode Menu ScreenStep NoneLCD/VF1/4 Menu Screen AUDIO/MIC2/2 Menu ScreenMIX BlueLCD/VF3/4 Menu Screen LCD/VF2/4 Menu ScreenVoltage SECTC/UB/CLOCK Menu Screen LCD/VF4/4 Menu ScreenColor InternalTIME/DATE Menu Screen Header REC Menu ScreenOTHERS2/2 Menu Screen OTHERS1/2 Menu Screen3MIN BlinkOTHERS2/2 Menu Screen Cont’d Genlock Menu ScreenFile Manage Menu Screen 100 101Skin color detection function, follow the steps below How to Use Skin DetailIf you want to change the range of colors recognized with Outputting Color Bars 104 105No HDV Signal No DV SignalSwitch Switch to VTRError Code Error Details GY-HD250/GY-HD251 Remedy Operation RGB? TroubleshootingHow to Display the Hour Meter AUX input SpecificationsGenlock input HD/SD SDI outputCorrection
Top Page Image Contents