JVC GY-HD201CHE, GY-HD200E, GY-HD200CHU, GY-HD200U, GY-HD201E, GY-HD200CHE manual HDV/DV Dubbing, Off

Page 94

USING EXTERNAL COMPONENTS

HDV/DV Dubbing

Connecting the GY-HD250/GY-HD251 to another video com- ponent equipped with HDV/DV connector (IEEE1394 stan- dard) using a IEEE1394 cable (optional) enables dubbing of digital signals with high picture quality and high-quality sound.

5.Set the PB TAPE item on the VIDEO FORMAT menu screen. X See page 79.

Select whether to automatically detect the playback tape video format or play back only a particular format. Normally, use the “AUTO” setting.

VIDEO FORMAT menu screen

When Using the GY-HD250/GY-HD251 as

Recording Unit

(Dubbing From Another Videocassette)

1.Set the IEEE1394 switch on left side of the GY-HD250/ GY-HD251.

DV : When dubbing in DV format

HDV : When dubbing in HDV format

2. Connect the units with the IEEE1394 cable.

3. Turn ON both units.

4. Place the GY-HD250/GY-HD251 in the VTR MODE.

Using the GY-HD250/GY-HD251 as the playback unit

(Dubbing to another video)

1.Set the IEEE1394 switch on the left panel of this device.

DV : When dubbing in DV format

HDV : When dubbing in HDV format

2.Connect the IEEE1394 cable.

3.Turn both devices on.

4.Set this device to VTR mode.

Press the CAM/VTR button. The VTR indicator lights.

1.

IEEE1394 switch

CH2-AUDIO OUT-CH1 VIDEO

1394IEEE

Recording unit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Signal flow

 

 

 

 

 

IEEE1394 cable

 

 

 

 

 

 

 

CAUTION

•Set the IEEE1394 switch on both devices to either HDV or DV.

•Start recording after making sure that both devices are properly connected.

6.Insert a videocassette tape.

GY-HD250/GY-HD251

: Recorded videocassette tape

Recording unit

: Videocassette you want to dub

7.Press the PLAY/STILL button on GY-HD250/GY-HD251 to start playback.

8.Start recording on the recording device.

See the recording device user manual for more informa- tion.

9.When dubbing is finished, stop recording on the record- ing device, press the STOP button on this device, and stop the playback.

MEMO

•Switch the IEEE1394 switch when this device is OFF.

•When you dub still images, they are low resolution images. Noise may also enter the audio.

•Operations may differ depending on the features and specifications of the connected device, and operations or data exchange may not be possible even if the devices are connected.

•If noise appears on the screen or the audio cuts out, re- connect the IEEE1394 cable or turn the GY-HD250/GY- HD251 on again.

•If you turn the power to the device connected to the IEEE1394 connector on and off or switch the video input, noise may occur in the audio. If you perform this type of operation, set the speaker volume as low as possible on the audio device connected to this device.

•Recording may not be possible in some cases even if the recorder is equipped with a IEEE1394 connector.

Press the CAM/VTR button to turn on the VTR indicator.

5. Set the frame rate.

Set the FRAME RATE item (60/30, 50/25, 24) on the

VIDEO FORMAT[1/2] menu to match the HDV/DV signal

frame rate input from the IEEE1394 connector.

X See page 77.

1.

IEEE1394 switch

CH2-AUDIO OUT-CH1 VIDEO

1394IEEE

Recording unit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Signal flow

 

 

 

 

 

IEEE1394 cable

 

 

 

 

 

 

 

CAUTION

•Set the IEEE1394 switch on both devices to either HDV or DV.

•Start recording after making sure that both devices are properly connected.

6.Set the time code and user bit recording.

Set the TC DUPLI. item on the TC/UB/CLOCK menu screen.

OFF

: Records the TC/UB set in this

 

device.

ON

: Records the TC/UB for the

 

IEEE1394 input.

Date and time data

: Records the data sent from the

 

playback device in DV format.

 

Records the data of the internal

 

clock in HDV format.

MEMO

In HDV format, the UB set in this device is recorded regard- less of the setting.

TC/UB

Date and Time

7.Insert the videocassettes.

GY-HD250/GY- : Insert the videocassette to be dubbed

HD251

to.

Playback unit

: Insert the recorded videocassette.

8.Start playback on the playback unit.

For details, see the instructions to the unit used for play- back.

•The playback picture from the playback unit appears on the GY-HD250/GY-HD251’s LCD monitor and view- finder screen.

9.Press the REC/VTR trigger button on the GY-HD250/GY- HD251 to start recording.

„ To temporarily pause the recording, press the REC or VTR trigger button.

„ To restart the recording, press the REC or VTR trigger button again.

10.When dubbing is completed.

Press the REC/VTR trigger button or the STOP button on the GY-HD250/GY-HD251 to stop recording, and then stop playback on the playback unit.

MEMO

Depending on the player, sound may not be heard momen- tarily from this device when switching modes from STILL to PLAY.

68

69

Page 93 Page 95
Image 94
Page 93 Page 95
Contents GY-HD200U/CHU Instructions GY-HD200E/CHE GY-HD201E/CHE For Customer UseSafety Precautions Important SafeguardsRemarque Information for Users on Disposal of Old Equipment Safety Precautions Cont’dThis symbol is only valid in the European Union European UnionSee pages 12, 36 For DC ×2/EarphoneSee SD memory card SeeContents Precautions for Use of Head Cleaning Tape Precautions for Proper UseRoutine and Periodical Maintenance Head CleaningCondensation Battery Pack to be UsedCharacteristic CCD Phe- nomena Videocassette to be UsedTh16 × 5.5BRMU Zoom LensFront Section MemoRear Section LCD DoorRight Side Section Left Side Section Top Section Recording and Image Out- put Formats Indications on the LCD Monitor and in the View- finder Status Screens in the Camera ModeSetting Status Contents of Indications Status ScreensContents Indications on the LCD Monitor and in the Viewfinder Cont’dIndication Indication Contents Magnified Status Indications on LCD Monitor NDFMenu Setting Screen Alarm Message DisplaySwitching between the LCD Screen and Viewfinder Display Safety Zone Indication Camera mode onlyBasic System Attaching the Zoom Lens How to Attach the View- finderAttaching the Microphone Provided Attaching the Tripod Base Optional Inserting an SD Memory CardBattery Operation AC OperationTurning the Power on Loading/Unloading the Cassette Setting and DisplayingDate and Time Displaying Time Code SettingDisplaying the Time and Date on the Screen Presetting time code data Presetting and Recording of Time CodeSetting Presetting user’s bit dataAbout Time Code Mode Presetting User’s BitAborting Preset Operation Playing Back Time CodeScreen Adjustment Viewfinder AdjustmentWhite Balance Adjustment Back Focus AdjustmentWhite Balance Adjustment Full Auto White Balance FAWSetting the Frame Rate Item White Shading AdjustmentSetting the Video Format Setting the REC ItemAudio Input Signal Selec- tion Camera SettingsScreen Size 43/169 Mode Selection Monitoring Audio during Recording Audio Input Signal Selection Cont’dBasic Recording Opera- tion About the Focus Assist FunctionFunction/Initial Setting If the Record-Standby Mode Contin- uesRecord-Standby or Stop mode Header REC FunctionHeader REC Function Playback ProcedureSearch Executing the Header REC FunctionConnecting the IEEE1394 Cable Connecting the VideoSignal Cables Displaying AlarmsDubbing with AV Devices HDV/DV DubbingHDV/DV Dubbing Cont’d Backup RecordingSettings OFFConnect a Remote Con- trol Unit RM-LP55/RM- LP57 Remote Control Unit Functions ListShutter Speed in 24p Mode ConnectionMenu Screen Configura- tion Setting Menu Screens TOP Menu ScreenVideo FORMAT1/2 Menu Screen Function/Setting bold characters indicate initial settingsSetting Description Frame RateMenu Screen Initial settings U model 7.5% E model 0.0%Video FORMAT2/2 Menu Screen AutoNormal MiddleHigh 108%Standard StopREC Item Setting for Step Setting for Variable Switch Mode Menu ScreenSwitch Mode menu screen is only displayed in camera mode White Balance Menu ScreenAUDIO/MIC2/2 Menu Screen AUDIO/MIC1/2 Menu ScreenMIX LCD/VF2/4 Menu Screen LCD/VF2/4 menu screen can only be set in camera modeLCD/VF1/4 Menu Screen 70-80%LCD/VF3/4 Menu Screen Screen is displayed in the VTR modeLCD/VF4/4 Menu Screen Header REC Menu Screen DisableTC/UB/CLOCK Menu Screen DropTIME/DATE Menu Screen OTHERS1/2 Menu ScreenOTHERS2/2 Menu Screen 1394Error displays Loading a menu settings fileSaving settings File Manage Menu ScreenInitializing formatting an SD mem- ory card How to Use Skin DetailRotate Using the Skin Detail Function How to Use Skin Detail Cont’dOutputting Color Bars Display Status Action Error Code Error Details This device Operation Remedy Blinking Pattern Remaining Battery/TapeHow to Display the Hour Meter TroubleshootingSymptoms Remedy External Dimensions unit mm SpecificationsHDV GY-HD251 Safety Precautions Important SafeguardsRemarque Port Cable Length HD251CHE See Provided only for U modelContents Routine and Periodical Maintenance Precautions for Proper UsePrecautions for Use of Head Cleaning Tape Condensation Battery Pack to be UsedCharacteristic CCD Phe- nomena Videocassette to be UsedIris A/R Input Zoom LensFront Section GNDAccording to the input level. When excessive 4TC GENE. Time code generator setting switchSetting, the time code always operates Rear SectionRight Side Section BGAIN Sensitivity selector switchPreset EREC REC trigger button start/stop recordingLeft Side Section RCATop Section Ieee Recording and Image Out- put FormatsRecording Composite Indications on the LCD Monitor and in the View- finder Indications on the LCD Monitor Viewfinder Cont’dFile Filter OFF ND1ND2 Full Auto ON, OFF GainEXT NDFCenter Mark OFF Safety ZoneSafety Zone OFF DV-24PAFinder How to Attach the ViewBasic System Attaching the Zoom Lens Attaching the Microphone ProvidedInserting an SD Memory Card SDHC-compliant memory cards cannot be used with this device„GY-HD250U Battery OperationAC Operation „GY-HD251ETurning the Power on Date and Time Setting and DisplayingLoading/Unloading the Cassette VTRDisplayed Time Code/User’s Bit Time code input entered the IEEE1394 connectorDisplaying Time Code Time codes are displayedTime code starts to run from the time it is Presetting and Recording of Time CodeContinual time codes across different scenes Time code generator’s running method isInternal Presetting the Time Code from the LCD ScreenPlaying Back Time Code Free REC Regen InternalExternal Blinks when the time code cannot be synchronizedSlave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111E TC OUTBack Focus Adjustment Screen Adjustment Viewfinder AdjustmentAdjusted Adjust the position and angle of the viewfinder Set the ND filter switch according to the current lighting White Balance AdjustmentWhite Shading Adjustment When correct white balance is obtained, the approximateScreen Size 43/169 Mode Selection Setting the Video FormatCamera Settings ND FilterAudio Input Signal Selec- tion Basic Recording Opera- tion How to set the Header REC menu screen Header REC FunctionFast-Forward, Rewind Playback ProcedureOutputting Audio SearchRecording Composite Video Signals from an External Device Connecting the VideoSignal Cables Status Screen Display on the LCD Screen or ViewfinderAdjust SC and H Phase Using Genlock Func- tionsSynchronized Signals Dubbing with AV DevicesHDV/DV Dubbing Backup Recording Connect a Remote Con- trol Unit RM-LP55/RM- LP57Menu Screen Configura- tion Connect a Remote Control Unit RM-LP55/RM-LP57 Cont’dSetting Menu Screens Menu Screen Configuration Cont’dOFF TOP Menu ScreenVideo FORMAT1/2 Menu Screen ExecuteVideo FORMAT2/2 Menu Screen Video FORMAT1/2 Menu Screen Cont’dMiddle Menu Screen3200K High108% NormalStandard White Balance Menu Screen PresetStop Step Switch Mode Menu ScreenAUDIO/MIC1/2 Menu Screen NoneMIX AUDIO/MIC2/2 Menu ScreenLCD/VF1/4 Menu Screen BlueVoltage LCD/VF2/4 Menu ScreenLCD/VF3/4 Menu Screen SECColor LCD/VF4/4 Menu ScreenTC/UB/CLOCK Menu Screen InternalHeader REC Menu Screen TIME/DATE Menu Screen3MIN OTHERS1/2 Menu ScreenOTHERS2/2 Menu Screen BlinkGenlock Menu Screen OTHERS2/2 Menu Screen Cont’d100 101 File Manage Menu ScreenIf you want to change the range of colors recognized with How to Use Skin DetailSkin color detection function, follow the steps below 104 105 Outputting Color BarsSwitch No DV SignalNo HDV Signal Switch to VTRError Code Error Details GY-HD250/GY-HD251 Remedy Operation How to Display the Hour Meter TroubleshootingRGB? Genlock input SpecificationsAUX input HD/SD SDI outputCorrection
Top Page Image Contents