JVC GY-HD200CHU, GY-HD200E manual Screen Adjustment Viewfinder Adjustment, Back Focus Adjustment

Page 85

PREPARATIONS FOR OPERATION

Screen Adjustment

 

Viewfinder Adjustment

 

 

 

LCD monitor direction, angle, screen brightness, etc. can be

Direction of the Viewfinder

adjusted.

Adjust the position and angle of the viewfinder.

 

 

Back Focus Adjustment

It is only necessary to perform this when the lens is attached for the first time or when focusing is not correct in both the telephoto and wide-angle positions.

1. Set the IRIS mode switch to M (Manual).

2. Set the zoom mode to M (Manual).

3. Open the iris by turning the iris ring.

If the illumination is too strong, reduce it or move to a

darker place.

4. Turn the zoom lever until the lens is at the maximum tele-

photo position.

5. Bring the subject into focus.

Adjusting the Direction and Angle of the LCD monitor

•With the LCD door in the open condition, rotate the LCD door.

•It can be turned 180° in upward direction and 90° in down- ward direction.

When turned 180° upward direction, the LCD monitor can be viewed from the lens side (vertically inverted image).

Diopter Adjustment

Rotate the eyepiece focusing ring until the viewfinder screen image is clearly visible.

Adjustment of the Viewfinder Screen

•PEAKING:

Adjusts the contour of the LCD monitor and the viewfinder screen.

•VF BRIGHT:

Adjusts the brightness of the viewfinder screen.

•It is easier to adjust back focus when the subject is more than 3 meters from the camera.

The optimal subject for this adjustment is a Siemens star chart.

3

4, 6

5

6. Set the lens to maximum wide-angle.

7. Loosen the back focus ring retaining knob.

8. View the same subject and adjust the back focus ring for

the best possible focus.

9. Repeat steps 4. through 8. about three times for fine

adjustment until the subject remains in focus in both the

telephoto position and the wide-angle position.

10.Tighten the back focus ring retaining knob to secure the ring.

180° up

PEAKING volume

LCD BRIGHT button

90° down

LCD lock release lever

Eyepiece focusing ring

VF BRIGHT volume

PEAKING volume

Sliding securing ring

Eyepiece

1

Adjusting the LCD monitor

•PEAKING:

Adjusts the contour of the LCD monitor.

•LCD BRIGHT:

Adjusts the brightness of the LCD monitor.

Adjustments are made on the LCD/VF[2/4] menu screen. X See page 90.

•LCD MIRROR MODE:

Sets the LCD monitor to display mirrored images when shooting facing the subject.

Adjustments are made on the LCD/VF[4/4] menu screen. X See page 92.

•LCD CONTRAST:

Adjusts the contrast of the LCD monitor.

•BLACK & WHITE:

Sets the LCD monitor and viewfinder to black and white display.

Viewfinder mount base

Adjustments are made on the LCD/VF[4/4] menu screen. X See page 92.

•VF CONTRAST:

Adjusts the contrast of the viewfinder screen.

•BLACK & WHITE:

Sets the LCD monitor and viewfinder to black and white display.

MEMO

The screen size of the viewfinder can be changed by selecting the desired size with the ASPECT item on the VIDEO FORMAT[1/2] menu screen (4:3 or 16:9).

2 7, 8, 10

Siemens star chart

50

51

Page 84 Page 86
Image 85
Page 84 Page 86
Contents For Customer Use GY-HD200U/CHU Instructions GY-HD200E/CHE GY-HD201E/CHESafety Precautions Important SafeguardsRemarque This symbol is only valid in the European Union Safety Precautions Cont’dInformation for Users on Disposal of Old Equipment European UnionSee For DC ×2/EarphoneSee pages 12, 36 SD memory card SeeContents Routine and Periodical Maintenance Precautions for Proper UsePrecautions for Use of Head Cleaning Tape Head CleaningCharacteristic CCD Phe- nomena Battery Pack to be UsedCondensation Videocassette to be UsedFront Section Zoom LensTh16 × 5.5BRMU MemoLCD Door Rear SectionRight Side Section Left Side Section Top Section Recording and Image Out- put Formats Setting Status Contents of Indications Status Screens in the Camera ModeIndications on the LCD Monitor and in the View- finder Status ScreensIndications on the LCD Monitor and in the Viewfinder Cont’d ContentsIndication Indication Contents NDF Magnified Status Indications on LCD MonitorSwitching between the LCD Screen and Viewfinder Display Alarm Message DisplayMenu Setting Screen Safety Zone Indication Camera mode onlyBasic System Attaching the Zoom Lens How to Attach the View- finderAttaching the Microphone Provided Inserting an SD Memory Card Attaching the Tripod Base OptionalAC Operation Battery OperationTurning the Power on Loading/Unloading the Cassette Setting and DisplayingDate and Time Displaying Time Code SettingDisplaying the Time and Date on the Screen Setting Presetting and Recording of Time CodePresetting time code data Presetting user’s bit dataAborting Preset Operation Presetting User’s BitAbout Time Code Mode Playing Back Time CodeViewfinder Adjustment Screen AdjustmentWhite Balance Adjustment Back Focus AdjustmentWhite Balance Adjustment Full Auto White Balance FAWSetting the Video Format White Shading AdjustmentSetting the Frame Rate Item Setting the REC ItemAudio Input Signal Selec- tion Camera SettingsScreen Size 43/169 Mode Selection Basic Recording Opera- tion Audio Input Signal Selection Cont’dMonitoring Audio during Recording About the Focus Assist FunctionRecord-Standby or Stop mode If the Record-Standby Mode Contin- uesFunction/Initial Setting Header REC FunctionSearch Playback ProcedureHeader REC Function Executing the Header REC FunctionSignal Cables Connecting the VideoConnecting the IEEE1394 Cable Displaying AlarmsHDV/DV Dubbing Dubbing with AV DevicesSettings Backup RecordingHDV/DV Dubbing Cont’d OFFShutter Speed in 24p Mode Remote Control Unit Functions ListConnect a Remote Con- trol Unit RM-LP55/RM- LP57 ConnectionMenu Screen Configura- tion TOP Menu Screen Setting Menu ScreensSetting Description Function/Setting bold characters indicate initial settingsVideo FORMAT1/2 Menu Screen Frame RateVideo FORMAT2/2 Menu Screen Initial settings U model 7.5% E model 0.0%Menu Screen AutoHigh MiddleNormal 108%Stop StandardSwitch Mode menu screen is only displayed in camera mode Switch Mode Menu ScreenREC Item Setting for Step Setting for Variable White Balance Menu ScreenAUDIO/MIC2/2 Menu Screen AUDIO/MIC1/2 Menu ScreenMIX LCD/VF1/4 Menu Screen LCD/VF2/4 menu screen can only be set in camera modeLCD/VF2/4 Menu Screen 70-80%LCD/VF3/4 Menu Screen Screen is displayed in the VTR modeLCD/VF4/4 Menu Screen TC/UB/CLOCK Menu Screen DisableHeader REC Menu Screen DropOTHERS1/2 Menu Screen TIME/DATE Menu Screen1394 OTHERS2/2 Menu ScreenSaving settings Loading a menu settings fileError displays File Manage Menu ScreenInitializing formatting an SD mem- ory card How to Use Skin DetailRotate Using the Skin Detail Function How to Use Skin Detail Cont’dOutputting Color Bars Display Status Action Blinking Pattern Remaining Battery/Tape Error Code Error Details This device Operation RemedyHow to Display the Hour Meter TroubleshootingSymptoms Remedy External Dimensions unit mm SpecificationsHDV GY-HD251 Safety Precautions Important SafeguardsRemarque Port Cable Length See Provided only for U model HD251CHEContents Routine and Periodical Maintenance Precautions for Proper UsePrecautions for Use of Head Cleaning Tape Characteristic CCD Phe- nomena Battery Pack to be UsedCondensation Videocassette to be UsedFront Section Zoom LensIris A/R Input GNDSetting, the time code always operates 4TC GENE. Time code generator setting switchAccording to the input level. When excessive Rear SectionPreset BGAIN Sensitivity selector switchRight Side Section EREC REC trigger button start/stop recordingRCA Left Side SectionTop Section Ieee Recording and Image Out- put FormatsRecording Composite Indications on the LCD Monitor and in the View- finder Viewfinder Cont’d Indications on the LCD MonitorND2 Filter OFF ND1File Full Auto ON, OFF GainNDF EXTSafety Zone OFF Safety ZoneCenter Mark OFF DV-24PABasic System Attaching the Zoom Lens How to Attach the ViewFinder Attaching the Microphone ProvidedSDHC-compliant memory cards cannot be used with this device Inserting an SD Memory CardAC Operation Battery Operation„GY-HD250U „GY-HD251ETurning the Power on Loading/Unloading the Cassette Setting and DisplayingDate and Time VTRDisplaying Time Code Time code input entered the IEEE1394 connectorDisplayed Time Code/User’s Bit Time codes are displayedContinual time codes across different scenes Presetting and Recording of Time CodeTime code starts to run from the time it is Time code generator’s running method isPlaying Back Time Code Presetting the Time Code from the LCD ScreenInternal Free REC Regen InternalSlave unit GY-HD250U/GY-HD251E/GY-HD110U/GY- HD111E Blinks when the time code cannot be synchronizedExternal TC OUTBack Focus Adjustment Screen Adjustment Viewfinder AdjustmentAdjusted Adjust the position and angle of the viewfinder White Shading Adjustment White Balance AdjustmentSet the ND filter switch according to the current lighting When correct white balance is obtained, the approximateCamera Settings Setting the Video FormatScreen Size 43/169 Mode Selection ND FilterAudio Input Signal Selec- tion Basic Recording Opera- tion Header REC Function How to set the Header REC menu screenOutputting Audio Playback ProcedureFast-Forward, Rewind SearchSignal Cables Connecting the VideoRecording Composite Video Signals from an External Device Status Screen Display on the LCD Screen or ViewfinderSynchronized Signals Using Genlock Func- tionsAdjust SC and H Phase Dubbing with AV DevicesHDV/DV Dubbing Connect a Remote Con- trol Unit RM-LP55/RM- LP57 Backup RecordingConnect a Remote Control Unit RM-LP55/RM-LP57 Cont’d Menu Screen Configura- tionMenu Screen Configuration Cont’d Setting Menu ScreensVideo FORMAT1/2 Menu Screen TOP Menu ScreenOFF ExecuteVideo FORMAT1/2 Menu Screen Cont’d Video FORMAT2/2 Menu Screen3200K Menu ScreenMiddle High108% NormalStandard White Balance Menu Screen PresetStop AUDIO/MIC1/2 Menu Screen Switch Mode Menu ScreenStep NoneLCD/VF1/4 Menu Screen AUDIO/MIC2/2 Menu ScreenMIX BlueLCD/VF3/4 Menu Screen LCD/VF2/4 Menu ScreenVoltage SECTC/UB/CLOCK Menu Screen LCD/VF4/4 Menu ScreenColor InternalTIME/DATE Menu Screen Header REC Menu ScreenOTHERS2/2 Menu Screen OTHERS1/2 Menu Screen3MIN BlinkOTHERS2/2 Menu Screen Cont’d Genlock Menu ScreenFile Manage Menu Screen 100 101If you want to change the range of colors recognized with How to Use Skin DetailSkin color detection function, follow the steps below Outputting Color Bars 104 105No HDV Signal No DV SignalSwitch Switch to VTRError Code Error Details GY-HD250/GY-HD251 Remedy Operation How to Display the Hour Meter TroubleshootingRGB? AUX input SpecificationsGenlock input HD/SD SDI outputCorrection
Top Page Image Contents