JVC GY-DV5000 instruction manual Magnified Status Indications on the LCD Monitor

2. CONTROLS, INDICATORS AND CONNECTORS

2. CONTROLS, INDICATORS AND CONNECTORS

2-6 Indications on the LCD Monitor and in the Viewfinder (Cont’d)
No.	Item		Contents
5	Time/Date indication	Recorded data are displayed during playback, fast forward, and rewind.
		During recording, the data from the DV connector is displayed.
		In the stop mode, the current data is displayed.
		Whether or not the date and time should be displayed and the display style
		are set on the TIME/DATE menu screen.
		When the date and time have not been set, the following indication appears.
		– – / – – / – –	– – : – – : – –
6	Audio sampling frequency indication	The audio sampling frequency used for the recording is displayed during
		playback.
		(32 K, 48 K, 44.1 K)
7	Audio level meter indication	Displays the audio level meters during playback.
		Whether or not to display this item is set with the AUDIO item on the LCD/
		VF (2/2) menu screen.

■ Alarm Message Display
Alarm display area		FAS
		–3dB
Alarm display area		FAW
		I
		SD
		B
		12.2V
01/02/03	AM01:23:45

●The following alarm messages are displayed while the Status(0, 1, 3) screen is shown in the Camera mode, or a status screen is shown in the VTR mode.

If an alarm is generated while the Status 2 screen is shown, the Status 0 screen returns to display the alarm.

●When an abnormality occurs in the VTR, a warning message with an error code is displayed.

8	VTR mode indication	Indicates the VTR operation status
		[STBY, STOP, PLAY, REC, FF, REW, FWD, REV, STL, BSRH, – – – (No
		tape loaded)
9	Event display	BLANK SEARCH : Indicates that blank search operation is in progress.

■Magnified Status Indications on the LCD Monitor

The characters on the status screens can be showed alone in magnified size on the LCD monitor.

1

Alarm Indication	Contents
PAL INHIBIT	Displayed when attempt is made to play back a tape recorded with PAL signal.
REC INHIBIT	Displayed when an unrecordable videocassette (the switch on the back of the
	cassette is set to “SAVE”) is loaded.
COPY INHIBIT	Displayed when attempt is made to record a copy-guarded signal.
LOW VOLTAGE	Displayed when remaining battery power becomes low.
TAPE NEAR END	Flashes when the remaining tape is 3 minutes or less in the shooting mode. It is
	not shown in the playback mode.
TAPE END	Displayed when the tape has reached its end.
INVALID TAPE!	Displayed when a data tape for PC use or DVC PRO cassette is used. The tape
	is ejected.
LP TAPE INVALID!	Displayed when attempt is made to playback a tape recorded in the LP mode.

EDITSEARCH

MONITOR

FILTER 3200K 5600K / 5600K 5600K /

SHUTTER STATUS

MENU

AUDIO

LEVEL

CH-1 CH-2

POWER VTR

ONOFF

DISPLAY button

CH1					OVER
48k	L - ∞ 40 30 20 10		0		dB
CH2					OVER
NDF	C12H34M3410S F
FREE
T
PLAY	SP				e
2		213min		109V.

3

■When the DISPLAY button is pressed while the Status (0, 1, 2, 3) screen is shown in the Camera mode, or a status screen is shown in the VTR mode, the displayed contents change every time the DISPLAY button is pressed.

Only image displayed → Characters shown enlarged

↑

Image and characters displayed ←

NO TAPE!		Displayed when no videocassette is inserted and the VTR trigger button is
		pressed.
NO DV SIGNAL!		Displayed when there is no input to the DV connector and recording is attempted.
COPY GUARD!		Displayed when attempt is made to play back a copy-guarded tape.
CLEANING TAPE!		Displayed when a head cleaning tape is inserted.
HEAD CLEANING REQUIRED!		Displayed when head is clogged. Head cleaning is necessary.
CLOSE CASSETTE COVER!		Displayed when operation is attempted while the cassette cover is open.
OPEN CASSETTE COVER!		Displayed when the cassette cover is closed during the eject operation.
VCR WARNING (Error code)		Displayed in case abnormalities occur in the VCR, or when condensation occurs
(Example)	7001	in the unit. For details, ☞ see page 88.
DRUMMOTORFAILURE

No.	Item		Contents
1	Audio Lock Indicator	Displayed during recording and playback when the audio signal is locked to
		the video signal.
2	Time Code Generator Setting Indicator	Indicates the set status of the TC GENE switch on the side section.
		FREE : TC GENE switch is set to PRESET-FREE RUN MODE.
		RECR : TC GENE switch is set to PRESET-REC RUN MODE.
		REGN : TC GENE switch is set to REGEN MODE.
3	Drop/Non-drop Indicator	Displayed during playback of a tape recorded in drop frame or non-drop
	(U model)	frame mode.
		DF	: During playback of a tape recorded in drop frame mode.
		NDF : During playback of a tape recorded in non-drop frame mode.

24

25