JVC GY-DV5000 instruction manual Recording the Color Bars, Playback Procedure

7. SHOOTING OPERATION

7-5 Recording the Color Bars

			OUTPUT switch
	EDITSEARCH
	MONITOR
FILTER
3200K
5600K	/
5600K
5600K	/
SHUTTER STATUS		POWER
MENU			VTR
	AUDIO	ON	OFF
	LEVEL

CH-1 CH-2

8. PLAYBACK MODE

8-1 Playback Procedure

Recorded pictures can be viewed in the viewfinder, or on the LCD monitor, or on the monitor connected to the video output connector.

Operation cover

POWER VTR

ONOFF

EDITSEARCH

MONITOR

FILTER 3200K 5600K / 5600K 5600K /

SHUTTER STATUS

MENU

AUDIO

LEVEL

CH-1 CH-2

BLANK SEARCH REW STOP FF PLAY STILL

Still button

PLAY button

Color bar signal of the built-in signal generator
An SMPTE standard color bar is output.
White Yellow Cyan Green Magenta	Red	Blue

Whether the camera image should be output or whether the color bar of the built-in signal generator should be output can be selected during record-standby and recording.

■ To output the color bar, set the OUTPUT switch to the BARS side.

■ To output the camera image, set the OUTPUT switch to the CAM AUTO KNEE ON/OFF side.

POWER VTR

ONOFF

POWER switch MODE switch

MODE	STOP button
	VTR
	CAM

Blue	Black Magenta	Black Cyan	Black	White
Black	White	Black
		(U model)
An EBU standard colour bar is output.

White Yellow Cyan Green Magenta Red Blue Black

(E model)

MEMO: Whether or not the audio reference signal should be output while the color bar is output can be selected with the TEST TONE item on the AUDIO/VIDEO menu screen.

MEMO:

●The GY-DV5000 can play back the following three types of videocassettes:

•DV videocassette

•MiniDV videocassette

•DVCAM videocassette

●Tapes recorded in the LP mode cannot be played back.

1. Set the POWER switch to ON.

2. Set the unit to the VTR mode. Press the MODE switch upward to turn on the VTR indicator.

●Playback is also possible in the Camera mode. Playback operation becomes possible when the STOP button is pressed to set the VTR operation mode indicator to indicate STOP.

3.	Load the recorded videocassette correctly.
	Slide the OPEN knob on the top section of the unit to open
	the cassette cover. Then insert the videocassette and close
	the cover.
	● When the videocassette is loaded, the unit enters the
	Stop mode.

4. Open the operation cover on the upper section of the unit. Slide the operation cover to the side to open.

5. Press the PLAY button.

●Playback starts.

6. Press the STILL button to stop playback temporarily.

●The unit enters the still mode.

7. To re-start playback, press the PLAY button.

8. To stop playback or the still mode, press the STOP button.

MEMO:

●In the VTR mode, the camera image is not output on the LCD monitor, in the viewfinder or through the video output connector.

●The VTR mode is indicated on the LCD monitor and in the viewfinder. (Status screen)

TC00:00:00:00 20min

12.2V

PLAY 01/02/03 AM––:––:––

VTR operation mode indication

●When the still picture mode or stop mode has continued for a while, the unit automatically switches to the tape protect mode.

Tape protect mode: Drum rotation is stopped in order to protect the tape.

●Noise may appear in the picture in the still mode.

●When the automatic tracking function is activated at the start of the playback mode, digital noise may appear in the playback image.

●This unit does not allow manual tracking adjustment.

●When playing back a tape that was recorded on another unit, digital noise may appear during playback.

●Following loading of the tape, the built-in head cleaner will emit a sound while operating. This does not indicate a malfunction.

●The data recorded for the date and time or time code on the tape can be shown on the screen.To enable or disable the display is selected on the menu screen:

Display of date and time: TIME/DATE menu screen
Display of time code:	LCD/VF (2/2) menu screen

56

57