JVC GY-DV5000 Outputting CH-3, CH-4 Channel Audio, Fast-Forward, Rewind, Blank Search

Page 31

8. PLAYBACK MODE

8. PLAYBACK MODE

8-5 Outputting CH-3, CH-4 Channel Audio

The DV format is capable of recording up to 4 channels when the 12-bit, 32 kHz sampling frequency is employed. The GY-DV5000 records audio on the two channels CH-1 and CH-2. (4-channel recording is possible in the case of DV input.) When the GY-DV5000 is used for playback of a tape that was recorded on another unit with audio recorded on the CH-3 and CH- 4 channels, the AUDIO SELECT item on the AUDIO/VIDEO menu screen must be set.

EDITSEARCH

MONITOR

FILTER 3200K 5600K / 5600K 5600K /

SHUTTER STATUS

MENU

AUDIO

LEVEL

CH-1 CH-2

POWER VTR

ONOFF

BLANK SEARCH REW STOP FF PLAY STILL

REW button FF button

.3

5600K

 

 

.4

5600K

1/64 ND

SHUTTER

STATUS

 

 

MENU

 

 

AUTO IRIS

 

FULL AUTO

EDITSEARCH

MONITOR

FILTER 3200K 5600K / 5600K 5600K /

SHUTTER STATUS

MENU

AUDIO

LEVEL

CH-1 CH-2

8-2 Fast-Forward, Rewind

■ Press the FF button in the stop mode to fast forward the

tape. Press the REW button in the stop mode to rewind the

MEMO:

SHUTTER dial

STATUS button

POWER VTR

ONOFF

tape.

■ Press the STOP button to stop fast forwarding or rewinding.

●When the tape approaches the end during fast forwarding or rewinding, the tape speed decelerates to protect the tape.

●The time required for fast forwarding and rewinding may become longer when used in a cold environment. This is not a malfunction.

TOP MENU screen

––– MENU –––

AUDIO/VIDEO..

LCD/VF..

TC/UB/CLOCK..

OTHERS..

VTR indicator

Setting

■Confirm that the GY-DV5000 is in the VTR mode. (VTR indicator: On)

8-3 Search

■Press the FF button in the play mode or still mode to search the tape in the forward direction. Playback takes place while fast forwarding.

Pressing the REW button executes search of the tape in the reverse direction. Playback takes place while rewinding.

(Each press on the button switches the speed to X5, X9, and X20.)

■ Press the PLAY button to resume normal playback. ■ Press the STOP button to stop.

MEMO: ● To output sound during the search, set the A.OUT AT SEARCH item on the AUDIO menu screen to ON. ● Block noise may appear in the picture or the image may freeze during the search.

FILE MANAGE..

 

MENU ALL RESET

CANCEL

EXIT

 

AUDIO/VIDEO menu screen

––– AUDIO/VIDEO –––

TEST TONE

ON

AUDIO MODE

32K

A.OUT AT SEARCH

ON

CH1 FRONT VR

ENABLE

WIND CUT

BOTH

1. Press the STATUS button for 1 second or longer to display the TOP MENU screen.

2. Rotate the SHUTTER to align the cursor () with the AUDIO/ VIDEO menu, and then press the SHUTTER dial.

●The AUDIO/VIDEO menu screen appears.

3. Rotate the SHUTTER to align the cursor () with the AUDIO SELECT item, and then press the SHUTTER dial.

●The setting area of the selected item starts blinking.

4. Rotate the SHUTTER dial to change the setting.

CH1/2

: To reproduce the sound (CH-1, CH-2)

 

recorded during shooting.

8-4 Blank Search

 

BLANK SEARCH button

 

BLANK SEARCH REW STOP FF

PLAY STILL

Status screen

BLANK SEARCH

 

12.2V

BRSH 01/02/03

AM––:––:––

Blank search operation indicator

This function can be used to locate blank portions (unrecorded portions) on the tape, such as the end of a recording.

1. Engage the stop or still mode.

2. Press the BLANK SEARCH button. ● Blank search starts. When a blank part (unrecorded part) on the tape is detected, the unit enters the STILL status in the VTR mode and the Standby status in the CAM mode.

■ To stop blank search, press the STOP button.

MEMO: “BLANK SEARCH” is indicated on the LCD monitor and in the viewfinder during blank search. (When the Status screen is shown.)

AUDIO REF.LEVEL

–20dB

AUDIO SELECT

CH3/4

AUDIO MONITOR

MIX

SET UP

7.5%

PAGE BACK

 

MEMO: After-recording on the CH-3 and CH-4 channels is not possible.

MIX

:

To reproduce the sound recorded during

 

 

shooting (CH-1, CH-2) and the after-recorded

 

 

sound (on CH-3 and CH-4) simultaneously.

CH3/4

:

To reproduce the sound after-recorded on CH-

 

 

3 and CH-4.

5. When the SHUTTER dial is pressed, the set value is

confirmed.

 

 

6. To return to the normal screen, use either of the following

methods.

 

 

●Press the STATUS button or

●Return to the TOP MENU screen and then select the EXIT

item before pressing the SHUTTER dial.

58

59

Page 30 Page 32
Image 31
Page 30 Page 32
Contents For Customer Use DV CamcorderLine OUT Port Cable LengthDC OUT OUTInterference by one or more of the following measures Literature accompanying the applianceInformation Television reception, which can be determined by turningOr played back on this camcorder Main FeaturesAC Operation Battery Pack Operation Optional Connecting a Video Component with DV ConnectorRoutine and Periodical Maintenance Introduction 1-1 Precautions for Proper UseFor servicing Condensation Introduction 1-3 Precautions for Use of Head Cleaning TapeCharacteristic CCD Phenomena Battery Pack to be UsedFront Section Right Side Section Right Side Section Cont’d Top Section Left Side SectionRear Section VTR mode DV signal input mode Status Screens in the Camera ModeStatus Screens Status Screen in VTR Mode DV Signal Input Mode Magnified Status Indications on the LCD Monitor S14 x 7.3B12 Lens OptionalBasic System 1.5-Inch Viewfinder OptionalVF-P115B Attaching the Microphone Optional Attaching the Zoom LensAttaching the Viewfinder Attaching the Microphone ProvidedCamera Battery Pack Operation OptionalFlat shape type battery pack Anton-Bauer battery pack AC OperationAttaching the Battery Pack Battery Pack Operation Optional Cont’dUsing an Anton-Bauer Battery Pack Attaching a Flat Shape Type Battery PackRecharging Turning the Power onTurning the Power OFF Operating Time with Battery PackREC Save Cassette Loading and UnloadingUnloading the Cassette Loading the CassetteTime Style Setting the Date and TimeViewing the LCD Monitor Date StyleRecording the Date and Time Data Displaying the Time and Date on the ScreenFilter Charging the Built-in BatteryCamera Settings Screen Size 43/LETTER Mode SelectionSmtpe type color bars External Monitor AdjustmentEBU type colour bars White Balance Adjustment Monitoring Audio during Recording Recording Level AdjustmentBasic Recording Operation When it is required to unload the videocassetteWhen the power should be turned off About the Quick REC Start ModeSearching the tape in forward direction If the Record-Standby Mode ContinuesSetting the time before the tape protection mode is engaged Screen indications during Edit SearchRecording the Color Bars Playback ProcedureSearch SettingOutputting CH-3, CH-4 Channel Audio Fast-Forward, RewindDate and time data SettingsOperation Connections10-1 10-2 Presetting and Recording of Time Code10-4 Reproducing Time Codes Menu Screen ConfigurationRegen Resetting the Menu Settings to the Factory Settings Setting Menu ScreensStoring Setting Values Reading Out a Menu Settings File11-5 Camera Operation Menu Screen 11-4 TOP Menu Screen11-6 Camera Process Menu Screen 11-8 Skin Color Adjust Screen11-7 Advanced Process Screen 11-10 LCD/VF Menu Screen AUDIO/VIDEO Menu Screen11-11 TC/UB/CLOCK Menu Screen 11-10 LCD/VF Menu Screen Cont’dOthers Menu Screen TIME/DATE Menu ScreenSetting procedure Following three methods Iris Brightness Adjustment12-3 Adjusting the Shutter Speed Lens iris can be adjusted using any Variable Scan V.SCAN 12-5 Gain Sensitivity AdjustmentRelationship between gain, iris and shutter Setting the Color and Range of the Skin Detail Function 12-7 How to Use Skin DetailAutomatic Setting Contents Indication Condition Remedy Alarm Indications and ActionsUsing the Skin Detail Function Screen indications on the LCD monitor and in the ViewfinderHead Cleaning Required Tape Near END LOW Voltage 13-1 Alarm Indications and Actions Cont’dBatt Accumulated drum running time TroubleshootingHour Meter Display TOP Menu menu screenSpecifications External Dimensions unit mm Optional Accessories
Related manuals
Manual 97 pages 6.91 Kb
Top Page Image Contents