JVC GY-DV5000 If the Record-Standby Mode Continues, Screen indications during Edit Search

7. SHOOTING OPERATION 7-2 Searching for Recorded Scenes (Edit Search)

7. SHOOTING OPERATION

7-3 If the Record-Standby Mode Continues

In the record-standby mode, it is possible to search for a scene when you want to check the recorded scene or continue recording from the scene.

Setting the time before the tape protection mode is engaged

The time before the tape protection mode is engaged from the record-standby mode can be set to 30 minutes or 3 minutes

When the record-standby mode has continued for about 30 minutes, the GY-DV5000 automatically stops drum rotation in order to protect the tape. (Tape protect mode)

EDITSEARCH

MONITOR

FILTER 3200K 5600K / 5600K 5600K /

SHUTTER STATUS

MENU

AUDIO

LEVEL

CH-1 CH-2

POWER VTR

ONOFF

EDITSEARCH
	EDIT SEARCH
	+ button
ATUS	EDIT SEARCH
	– button

with the LONG PAUSE TIME item on the OTHERS (1/2) screen menu.

00:00:00:00 20min

●In the tape protect mode, STOP is shown as the VTR mode indication on the LCD monitor and in the viewfinder screen. (Status 1 screen)

■To start recording from the tape protect mode, press the VTR trigger button.

●The drum starts rotating, and recording starts after about 3 seconds.

■To return to the record-standby mode from the tape protect mode, press the RET button.

	48k
STOP 01/02/03	AM01:23:45
VTR mode indication

Screen indications during Edit Search
During Edit Search, the VTR mode is indicated as ED.FWD or
ED.REV on the LCD monitor or in the viewfinder. (When Status
1 screen is displayed.)
00:00:00:00
		20min
		FAS
		–3dB
		FAW
		I
		SD
FIL1		B
F5.6	48k	12.2V
ED.FWD 01/02/03	AM01:23:45
ED.FWD: Forward search
ED.REW: Reverse search

Engage the record-standby mode.

■Searching the tape in forward direction

1. Press the EDIT SEARCH + button. While the + button is pressed, playback takes place at the normal speed.

2. When the EDIT SEARCH + button is released, the standby mode is reengaged.

■Searching the tape in reverse direction

1. Press the EDIT SEARCH – button. While the – button is pressed, reverse playback takes place at -1times the normal speed.

2. When the EDIT SEARCH – button is released, the standby mode is reengaged.

MEMO:

●Block noise may appear and the image may freeze during search.

7-4	Checking Recorded Contents in Record-Standby Mode (Recording Check Function)
	RET button	This function is available only when the GY-DV5000 is in the
		standby mode.
		In the record-standby mode, approximately 2 seconds of the
		last recorded portion can be played back.
		● The recorded contents can be checked on the LCD monitor
		or in the viewfinder or on a monitor connected to the
		MONITOR OUT or Y/C OUT connectors.
		● The video image from the VTR section is shown on the LCD
		monitor or in the viewfinder or on the monitor connected to
		the MONITOR OUT or Y/C OUT connectors.
		1. In the record-standby mode, press the RET button on the
			camera lens section.
			• The tape is slightly rewound and played back for
			approximately 2 seconds.
			After playback is finished, the tape returns to the position
			at which the RET button is pressed and the record-
			standby mode resumes.
		■ When the RET button is kept pressed, the tape is rewound
		and played back for approximately 15 seconds at maximum.
		● Pressing the VTR trigger button during playback will put
			the unit in REC standby mode. The camera will
			automatically return to recording mode after playback.
		*	This function does not work when the GY-DV5000 is in
			the stop mode.
		*	During recording check, the following indication will
			appear if the error rate increases due to head clogging,
			etc.
			• “ HEAD CLEANING REQUIRED!” is shown on the LCD
			monitor or in the viewfinder. (When the Status 0, 1, 3
			screen is displayed.)

54 55