5. PREPARATIONS
5. PREPARATIONS
TIME/DATE menu screen | |
DISPLAY | ON |
DISPLAY MODE | BARS+CAM |
DATE REC | OFF |
DISPLAY STYLE | DATE+TIME |
DATE STYLE | MM/DD/YY |
TIME STYLE | 24HOUR |
SEC DISPLAY | ON |
CLOCK ADJUST.. |
|
PAGE BACK |
|
CLOCK ADJUST menu screen | |
DATE (Year/Month/Day) |
|
DATE(MM/DD/YY) | 12/12/02 |
TIME | 09:33 |
PAGE BACK |
|
Time (Hour:Min)
6.
7.
8.
9.
Display the screen for setting the date and time. |
|
Rotate the SHUTTER dial to align the cursor ( | ) with the |
CLOCK ADJUST item, and then press the SHUTTER dial. | |
● The CLOCK ADJUST screen appears. |
|
Set the date and time.
The blinking digit is the one to be set.
1When the SHUTTER dial is pressed, the blinking digit moves to the next digit.
2When the SHUTTER dial is rotated, the value of the blinking digit changes.
When the SHUTTER dial is rotated upward, the value becomes higher. When rotated downward, the value
becomes smaller.
3Repeat the procedure described in 1 and 2 above to set the month, day, year, hours, minutes.
The digits indicating seconds cannot be set.
4Press the SHUTTER dial in sync with a time signal to enter the date and time precisely.
When all the settings are completed, rotate the SHUTTER dial to align the cursor with the PAGE BACK item, and then press the SHUTTER dial.
●The TIME/DATE menu screen returns.
To return to the normal screen, use either of the following methods. Press the STATUS button or Return to the TOP MENU screen and then select the EXIT item from the TOP MENU screen before pressing the SHUTTER dial.
Displaying the Time and Date on the Screen | |||
TC/UB/CLOCK menu screen | |||
TC PRESET | 00:00:00:00 | ||
|
| EXECUTE | |
TC CLEAR | CANCEL | ||
UB PRESET | 00 00 00 00 | ||
|
| EXECUTE | |
UB CLEAR | CANCEL | ||
DROP/NON DROP DROP | |||
TIME/DATE.. |
|
| |
PAGE BACK |
|
| |
TIME/DATE menu screen | |||
DISPLAY | ON | ||
DISPLAY MODE | BARS+CAM | ||
DATE REC | OFF | ||
DISPLAY STYLE | DATE+TIME | ||
DATE STYLE | MM/DD/YY | ||
TIME STYLE | 24HOUR | ||
SEC DISPLAY | ON | ||
CLOCK ADJUST.. | |||
PAGE BACK |
|
| |
|
|
| FAS |
|
|
| |
|
|
| FAW |
|
|
| I |
|
|
| SD |
|
|
| B |
|
|
| 12.2V |
01/02/03 AM01:23:45 | |||
|
|
|
|
Date | Time | ||
Whether or not the time and date should be displayed on the screen and how to display them are set on the TIME/DATE menu screen.
1. Display the TIME/DATE menu screen.
1Select the TC/UB/CLOCK item on the TOP MENU screen.
2Select the TIME/DATE item on the TC/UB/CLOCK menu screen.
2. Set the TIME/DATE menu screen.
●DISPLAY item : Sets whether or not date and time should be displayed. Set to ON to display the indications.
●DISPLAY MODE item : Sets the video output mode in which date and time should be
| displayed. |
BARS | : Displayed when the OUTPUT switch |
| on the side section is set to BARS. |
CAM | : Displayed when the OUTPUT switch |
| on the side section is set to CAM. |
BARS + CAM | : Date and time are always displayed. |
●DISPLAY STYLE : Sets the style in which the date and time are displayed.
DATE + TIME : | Date and time are displayed. | |
DATE | : | Date only is displayed. |
TIME | : | Time only is displayed. |
■Display of date and time in the various operation modes.
In Camera mode | : | The date and time of the internal |
|
| clock are displayed. |
In VTR playback mode : | The date and time recorded on the | |
|
| tape are displayed. |
In VTR stop mode | : | The date and time of the internal |
|
| clock are displayed. |
During DV signal input : | The date and time from the DV | |
|
| connector are displayed. |
Recording the Date and Time Data | |
TIME/DATE menu screen | |
DISPLAY | ON |
DISPLAY MODE | BARS+CAM |
DATE REC | BARS+CAM |
DISPLAY STYLE | DATE+TIME |
DATE STYLE | MM/DD/YY |
TIME STYLE | 24HOUR |
SEC DISPLAY | ON |
CLOCK ADJUST.. |
|
PAGE BACK |
|
To record the date and time data during shooting, make the menu settings described below. When the DATE REC item on the TIME/DATE menu screen is set to “BARS” or “BARS+CAM”, the screen size will be fixed at an aspect ratio of 4:3.
■Setting the TIME/DATE menu
● DISPLAY item | : | Set to ON. |
●DATE REC item : Select the video mode in which date
|
| and time data should be recorded. |
BARS | : | Date and time data are recorded only |
|
| when color bars are output. |
BARS+CAM | : | Date and time data are recorded when |
|
| color bars and camera image are output. |
OFF | : | Date and time data are not recorded. |
MEMO:
DATE REC cannot be set during recording.
42 | 43 |