JVC GR-SXM530 specifications Indications During Playback, EN63, Displayed during Insert Editing

Indications During Playback

1 2 3 4 5 6 7 8

		S–E T		SP 4
TBC
			– 1 : 2 3 : 4 5
	MONOTONE				AT

M– 0 : 1 2 : 3 4

VOLUME – – – – – –6– – – – – +

09

Warning Indications

EN63

1• : Cassette Indicator Displayed when a tape is loaded.

• w: Insert Editing Indicator		pg. 52
Displayed during Insert Editing.
2 TBC Indicator		pg. 23
3 Playback Special Effect Indicator		pg. 23
4 Recording Format Indicator (S/S-ET)		pg. 12
5 Tape Counter		pg. 23, 52
6 Recording Mode Indicator (SP/EP)		pg. 14
7 Tape Running Indicator
4	: Playback
3 : Fast-Forward/Shuttle Search
2 : Rewind/Shuttle Search
6	: Pause
e4 : Audio Dubbing
8 Tracking Indicator		pg. 23
9 Tape Counter		pg. 52
Displayed only during Insert Editing.
0 • BRIGHT: Bright Level Indicator		pg. 22

•VOLUME: Speaker Volume

Indicator
pg. 22

Indications		Function
	Displays the battery remaining power.
	Remaining power level: high. It does not necessarily
	mean that the battery pack is fully charged.
	Remaining power level: exhausted
	As the battery power comes close to nil, the battery indicator		blinks (battery
	power warning).
	When the battery power is exhausted, power turns off automatically.
	Blinks when no cassette is loaded, or when the Erase Protection tab is not in the position
	that allows recording.			( pg. 15)
TAPE END	Appears when the tape ends during recording, playback or fast-forward.			( pg. 59)
LENS CAP	Appears for 5 seconds after power is turned on if the lens cap is attached.
	These 2 warnings appear alternately every 3 seconds if condensation occurs. In this case,
CONDENSATION	all functions except tape eject and power on/off are disabled. Remove the tape, turn the
	unit off (without removing the power supply), wait a few minutes for the warnings to
OPERATION PAUSED
	clear, and turn it on again.
PLEASE WAIT
	These 2 warnings appear alternately every 3 seconds if dirt is detected on the heads
HEAD CLEANING	during recording. In this case, use an optional cleaning cassette. If the warning remains
REQUIRED	after cleaning, consult your nearest JVC dealer.
USE CLEANING
CASSETTE
E01— E06	The error indications (E01 — E06) show what type of malfunction has occured. If an
UNIT IN	error indication and warning appear, turn the unit off, remove the power supply (battery,
SAFEGUARD MODE	etc.) and wait a few minutes for them to clear. When it does, you can resume using the
REMOVE AND	camcorder. If the indication remains, consult your nearest JVC dealer.
REATTACH BATTERY