Transmitted beam effective area
15° | 5m |
30 |
|
| |
|
| ||
° |
| 30° | |
15° | |||
|
Remote sensor
|
|
| EN |
| 63 | |
|
|
|
| |||
|
|
|
| |||
| FEATURE: | |||||
| PURPOSE: | The remote control lets you set/release | ||||
|
| Interval Timer and Rec Time functions | ||||
|
| as well as the Menu Screen. | ||||
| OPERATION: |
| ||||
|
| 1) Set | ||||
|
| Instead of performing steps 1 through | ||||
|
| 4 on pg. 38 | ||||
|
| TIME on the remote control. Each | ||||
|
| time INT. TIME is pressed, the | ||||
|
| Interval Timer indicator appears, |
When using the remote control, be sure to point it at the remote sensor. The above illustration shows the approximate transmitted beam effective area for indoor use.
The transmitted beam may not be effective or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting.
changing in the following order: 15S, |
30S, 1MIN, 5MIN and No indication |
(off). |
2) Release |
Instead of setting “INT. TIME” to |
“OFF” in the Menu, press INT. TIME |
on the remote control until the |
Interval Timer indicator disappears. |
Animation |
1) Set |
Instead of performing steps 1 and 2 |
Interval Timer Indicator
| 1MIN | INDEX |
| 1 2S |
|
|
| |
|
|
|
Rec Time Indicator
Viewfinder
Index Code Marking
on pg. 39 (“Animation”), press REC |
TIME on the remote control. Each |
time REC TIME is pressed, the Rec |
Time indicator appears, changing in |
the following order: 1/4S, 1/2S, 1S, |
5S and No indication (off). |
2) Release |
Instead of using the Menu in step 5 |
on pg. 39, press REC TIME on the |
remote control until the Rec Time |
indicator disappears. |
|
1) Set |
Instead of performing steps 1 through |
3 on pg. 39 |
INT. TIME and REC TIME on the |
remote control. Each time INT. TIME |
is pressed, the Interval Timer |
indicator appears, changing in the |
following order: 15S, 30S, 1MIN, |
5MIN and No indication (off). Each |
time REC TIME is pressed, the Rec |
Time indicator appears, changing in |
the following order: 1/4S, 1/2S, 1S, |
5S and No indication (off). |
2) Release |
Instead of using the Menu in step 5 |
on pg. 39, press INT. TIME and REC |
TIME on the remote control until the |
indicators disappear. |
START/STOP
VISS
INT. TIME
REC TIME
NOTE: | Also refer to pgs. 38 and 39. |
|
|
FEATURE: | Index Code Marking |
PURPOSE: | To give you automatic access to any |
| selected point on a recording. |
OPERATION: | 1) Press VISS once to place the index |
| code. “INDEX” blinks during |
| marking. |
NOTE: | If VISS is pressed during Record- |
| Standby mode, the mark is placed |
| where START/STOP is pressed. |