JVC LYT0089-001A specifications Basic Playback EN, Button System Select Switch

D.S.C.PLAYBACK

BasicPlaybackEN53

Page Button

System Select Switch

To move the page next

Viewfinder

Still images shot using this camcoder are automatically numbered, then stored in numerical order in the built-in memory. You can view the still images stored in memory, one at a time, much like flipping through a photo album.

SELECT MODE

1 Set the System Select Switch to “D.S.C.”, then set the Power Switch to “PLAY”.

•The still image stored in memory is displayed. •When no still image is stored in memory, the

screen becomes blue.

PLAY BACK

2 Press “W” or “T” located on the Page Button to select the still image you want to view.

•Each time “W” is pressed, the page goes back, while each time “T” is pressed, the page goes next.

•Even if you shoot a new picture after playing back a still image with a low number, this will not overwrite the existing picture because new pictures are automatically stored after the still image most recently stored in memory.

NOTES:

●The playback picture can also be viewed on a connected TV (☞ pg. 44). Camcorder operation is the same as described in this section.

●When viewing a playback picture on a connected TV, it may jitter slightly.

To move the page back