JVC YU30052-572 manual Feature, Purpose, Operation

RECORDING Basic Features

Zoom-in

WW WW

TTTT

Zoom-out

Zoom indicator bar

W

Zoom level indicator

T

Shooting mode selector

FAR

+MENU

NEAR

–

Power zoom lever

Main Menu	Shift Zoom	♦50x
screen	Tele Macro	OFF
	Gain Up	AGC
	Color Filter	NOR .
	Tape Length	T45
	Title
	Date/Time
	Sub Menu

	EN 13
FEATURE:	Zooming
PURPOSE:	To produce the zoom in/out effect, or
	an instantaneous change in image
	magnification.
OPERATION:	28X Hyper zoom
	Digital circuitry doubles the
	maximum 14x magnification offered
	by optical zoom.
	1) To zoom in, slide the Zoom Lever
	toward “T”.
	2) To zoom out, slide toward “W”.
	Shift Zoom
	By digitally processing and magnify-
	ing images, zooming is possible from
	5 – 14 times the optical zoom limit,
	to a maximum of 140x magnifica-
	tion.
	1) Set the Shooting Mode Selector to
	“PRESET” and press MENU to
	access the Main Menu screen.
	2) Press + or – to move the highlight
	bar to “Shift Zoom.”
	3) Press FAR or NEAR to set the
	magnification. “50x” magnifies
	wide-angle images to approxi-
	mately 3.6 times the original size,
	and enables zooming in the 18x –
	50x range. “140x” magnifies wide-
	angle images to approximately 10
	times the original size, and allows
	zooming from 50x to 140x. To
	disable Shift Zoom, set it to “OFF”.
	4) Press MENU to close the Main
	Menu screen.
NOTES:	● During Hyper Zoom, the speed
	increases the further you slide the
	Zoom Lever.
	● Focusing may be come unstable
	during Hyper Zoom. In this case,
	set the zoom while in Record –
	Standby, set manual focus or Focus
	Lock (☞ pgs. 20, 21), then zoom in
	or out in Record mode.
	● The Zoom Level Indicator (5) only
	moves during optical zoom. Once
	the indicator reaches “T”, all
	magnification from that point is
	through digital processing.
	● During digital image processing,
	the quality of the image may suffer.
FEATURE:	Quick Review
PURPOSE:	To check the end of the last
	recording.
OPERATION:	1) Press “ ” and release quickly
	during the Record–Standby mode.
	• Tape is rewound for about 2
	seconds and played back
	automati-cally, then pauses in
	Record–Standby mode for the
	next shot.
NOTE:	Distortion may occur at start of
	playback.
	This is normal.