JVC YU30052-572 manual Select Snapshot Mode, Perform Snapshot Recording, Activate Motor Drive

SNAP SHOT

SNAP SHOT MODE

Frame Pin-up M u l t i 4

Full

Multi 4Multi 9

Pin-Up

A still image on a blue background. The image is bordered in white and a shadow effect is added to give it a more dimensional feel.

Frame

A still image with a white border is recorded.

Full

A still image that occupies the entire image field is recorded.

Multi-Analyzer 4/Multi-Analyzer 9

		1	2	3
1	2
		4	5	6
3	4	7	8	9

Record multiple images in one scene

(4 or 9 at a time). The images appear and are stored in this order: 1, 2, 3, 4 (5, 6, 7, 8, 9 for Multi-Analyzer 9). In the Motor Drive mode, after “9”, the next image recorded is “1”, and the cycle is repeated.

EN 17

Snapshot

This interesting feature lets you record several types of digital still images that look, and sound, like photo- graphs. It’s a great way to spice up footage of events such as parties, weddings and graduations.

SELECT SNAPSHOT MODE

1 Press SNAP SHOT MODE to cycle through the modes as shown in the illustration at left. Once the desired mode appears, it is selected and activated, and its indicator appears, within 2 seconds.

PERFORM SNAPSHOT

RECORDING

2 Press SNAP SHOT.

If you press during recording . . .

.... a still image is displayed and recorded in the

selected mode, then the camcorder resumes normal recording. In the Full and Frame modes, the new image comes in gradually overall. In the Pin-Up and Multi-Analyzer modes, the new image comes in gradually from the center.

If you press during Record–Standby . . .

.... a still image is displayed and recorded in the

selected mode, then the camcorder re-enters the Record–Standby mode.

Motor Drive Function

SELECT SNAPSHOT MODE

1 Select as in step 1 above.

ACTIVATE MOTOR DRIVE

2 During Snapshot recording, press and hold down SNAP SHOT. You can take rapid snapshots with an interval of approximately 0.7 seconds between stills.

NOTES:

●The Date/Time display will disappear during Snapshot recording.

●The Motor Drive function cannot be activated using the SNAP SHOT button on the RM-V706U remote control unit (provided).

●When Multi-Analyzer is activated, the shutter sound may not match the appearance of the images.