6EN GETTINGSTARTED(cont.)
Clock (Lithium) Battery Insertion/Removal
A
This battery is necessary for clock operation and to perform date/time settings.
SWITCH OFF POWER
1 Switch off the unit’s power and remove the power supply unit.
OPEN COVER
2 Open the clock battery compartment cover while pressing the release tab.
REMOVE BATTERY (when replacing)
3 Insert a pointed,
4
5
INSERT BATTERY
Ensuring the plus (+) side is up, insert the CR2025 lithium battery and push it in.
CLOSE COVER
Close the compartment cover until it clicks in place.
NOTE:
See “SAFETY PRECAUTIONS”(☞ pg. 2) for information on safe handling of lithium batteries.
Viewfinder Adjustment
3
1 2
Set POWER to “CAMERA”.
1
2
3
POSITION VIEWFINDER
Adjust the viewfinder manually for best viewability (see illustration at left).
SELECT MODE
Set the power switch to CAMERA.
ADJUST DIOPTER
Turn the diopter adjustment control until the indications in the viewfinder are clearly focused.