22EN
Shooting Mode Selector
FAR
+EFFECT/PROG.AE
NEAR
–
RECORDINGAdvancedFeatures(cont.)
Program AE With Special Effects
Useful in making the picture look creative and attractive. Effects can be selected during recording, as well as in
SELECT SHOOTING MODE
1 Set the Shooting Mode selector to either “FULL AUTO” or “PRESET”.
If you set to “FULL AUTO”, . . .
.... only the Cinema mode can be activated.
If you set to “PRESET”, . . .
.... you can choose any one of the 8 effects
available.
SELECT EFFECT
OFF
1 C i n e m a
2 S e p i a
3 T w i l i g h t
4 S p o r t s
5 HI . S 1/2000
6 Classic Film
7 Strobe
8 Slow Shutter
Effect menu
2 If you set to “FULL AUTO”, . . .
.... pressing EFFECT/PROG.AE turns the Cinema
mode on and off.
If you set to “PRESET”, . . .
.... pressing EFFECT/PROG.AE brings up the Effect
menu. Press again to move the highlight bar to the desired effect. Once you decide on an effect, it is selected and activated, and its indicator appears, within 2 seconds.
•If you started this procedure in the Record– Standby mode, press the Recording Start/Stop button to begin recording at this point.
DEACTIVATE EFFECT
3 When the Shooting Mode Selector is set to “FULL AUTO”, . . .
.... press EFFECT/PROG.AE.
When set to “PRESET”, . . .
.... press EFFECT/PROG.AE to bring up the Effect
Menu, and press again to move the highlight bar to “OFF”.
NOTE:
If “Shift Zoom” (☞ pg. 13) is set to “50x” or “140x”,
Program AE effects cannot be used.
EFFECT/PROG.AE indicator