reader mode setup
READER #1 MODE
READER#1 is the default reader that is built in this product.
1.Press the F1 SETUP MENU button.
2. | Use the buttons | 4 | and | 6 | to move to the READER#1 MODE item and |
| press ENT . |
|
|
|
|
3. | Use the buttons | 4 | and | 6 | to select a reader mode. |
2 modes are available for your choice.
3.READER#1 MODE ID ONLY
READER MODE
• ID ONLY : In this mode, you can get access only with the proximity card or ID number.
ID+P/W : If configured with this mode, access is granted only when the password is entered after reading the card or entering the ID number.
4. When done, press ENT to save your settings.
3. READER#1 MODE
JID+P/W
3.READER#1 MODE ID+P/W
SETUP
READER #2 MODE
READER#2 is an external reader for exit.
1.Press the F1 SETUP MENU button.
2. | Use the buttons | 4 | and | 6 | to move to the READER#2 MODE item and |
| press ENT . |
|
|
|
|
3. | Use the buttons | 4 | and | 6 | to select a reader mode. |
2 modes are available for your choice.
• ID ONLY : In this mode, you can get access only with the proximity card or ID number.
ID+P/W : In this mode, you can get access through the password authentication after using the proximity card or entering the ID number.
4.READER#2 MODE ID ONLY
4. READER#2 MODE
JID+P/W
4. When done, press ENT to save your settings. | 4. READER#2 MODE |
ID+P/W
English _ 29
