user management
REGISTERING ID IN QUICK MODE
To register ID
1.Press the F12 SETUP MENU button.
2. Use the buttons 4 and 6 to move to the REGISTRATION item and press ENT .
3.Use one of the following two ways to enter an ID:
•Place the card on the main unit to display the card ID on the screen.
•Use the keypad to enter the number and press ENT .
4.Enter the password and press ENT .
5.ID registration is completed.
•Registering in Quick mode will set TA and TB to 00, and RD, MA, MB, LV to 0. (Refer to page 32.)
(QUICK MODE)
1. REGISTRATION
1.REGISTRATION ID:_
ENTER PIN PUT ID CARD
1.REGISTRATION ID:12345678 PASS WORD:_
USER MANAGEMENT
ID REGISTERED!
English _ 31
