Initialization
INITIALIZING THE SYSTEM
Initializing the system using the Initialize switch
Initialize the system using the Initialize switch on the rear of the product.
1.Check the power terminal on the rear of the product and disconnect the power cable.
2.While holding the Initialize switch, connect the power cable again.
3.While holding the Initialize switch, wait until the “Initialize OK?” message appears on the screen.
It takes about 8 seconds to proceed.
•Do not press the Initialize switch while the initialization message appears.
4. Press the button 1 to proceed with the initialization process with the “WAIT…” message on the screen.
• To cancel Initializing the system, press 0 .
5.When the Initializing is done, you will move to the standby screen.
J Note that the initialization process will restore all previous settings to the factory default.
INITIALIZE OK?
1:YES 0:NO
WAIT…
Sat 06 / 06 / 2009
10 : 30 : 20
INITIALIZATION
System Initialization in Master Mode
You can Initialize the system through authentication of the master card. For entering the master mode, see page 24.
1.Press the F8 SETUP MENU button.
2. Use the buttons 4 and 6 to move to the SYSTEM INIT. item and press ENT .
3.The initialization screen appears.
4. Press the button 1 to proceed with the initialization process with the “WAIT…” message on the screen.
• To cancel Initializing the system, press 0 .
5.When the Initializing is done, you will move to the standby screen.
J Note that the initialization process will restore all previous settings to the factory default.
1. SYSTEM INIT.
1.SYSTEM INIT. 1:YES, 0:NO
WAIT…
English _ 23
