initialization
BAUD RATE SETUP
This product supports 9600, 19200, 38400, and 57600 bps, and it is set to 57600 bps by default.
An improper speed setting can cause a communication error so ensure that you specify the same speed in the same network.
1.Press the F1 SETUP MENU button.
2. | Use the buttons | 4 | and | 6 | to move to the BAUD RATE item and press |
| ENT . |
|
|
|
|
3. | Use the buttons | 4 | and | 6 | to select a serial communication speed. |
• 9600
19200
38400
57600
4. When done, press ENT to save your settings.
M If you encounter a problem with the communication, check the followings first.
-Check the communication addresses for this product and the host PC (software).
-Check the baud rate settings of each of the host PC and this product.
-Check the communication port and cable.
-Check the host PC for the port settings.
8.BAUD RATE 57600
8. BAUD RATE
J19200
8.BAUD RATE 19200
FACTORY DEFAULTS
All menu settings will return to the factory default. (The memory is not deleted.)
1.Press the F8 SETUP MENU button.
2. | Use the buttons | 4 | and 6 to move to the DEFAULT SET item and press | 6. DEFAULT SET |
| ENT . |
|
|
|
3. | Press the button | 1 | to restore the menu settings to the default. |
|
• To cancel the resetting, press the button 0 .
6. DEFAULT SET
1:YES, 0:NO
28_ initialization
