40 EN MANAGING FILES |
|
|
|
| |
|
|
|
|
|
|
To delete by selecting multiple files |
| Cleaning Up a Recording |
|
| |
|
|
| |||
5 Press / to select [FILE SELECT], then |
|
| / | ||
press 49. |
| Medium |
|
| |
●The index screen appears.
6 Press 
/ 
/ 
/ 
to select the file you want to delete, then press 49.
●To select other files, repeat step 6.
●The scroll bar can also be used with the zoom lever and pressing 
/ 
. ( pg. 25, 30)
●If you slide the zoom lever towards T, the preview screen is displayed. Sliding the zoom lever towards W returns to the index screen.
7 Press MENU.
8 Press 
/ 
to select [EXECUTE AND QUIT], then press 49.
●The selected files are deleted.
To delete all files
5 Press 
/ 
to select [DELETE ALL], then press 49.
6 Press 
/ 
to select [EXECUTE], then press 49.
●To cancel deletion, select [CANCEL], then press
49.
NOTES:
●Protected files cannot be deleted. To delete them, release protection first. ( pg. 39)
●Once files are deleted, they cannot be restored. Check files before deleting.
CAUTION:
Do not remove the recording medium or perform any other operation (such as turning off the power) during deletion. Also, be sure to use the provided AC adapter, as the recording medium may be corrupted if the battery becomes exhausted during deletion. If the recording medium becomes corrupted, format it. ( pg. 20)
Writing speed of recording media tends to become slow after long period of repeated use. To regain the speed, execute cleanup periodically. The cleanup function is equivalent to “Defragmentation” of PC’s function.
NOTES:
●Make sure to use the provided AC adapter for the power supply when cleaning up a recording medium. ( pg. 16)
●It is recommended to run check disk regularly on the PC, on condition that there is no data on the hard disk of the camera.
1 Set the power switch to 
or 
.
2 Press MENU. The menu screen appears.
3 Press | / | to select [REC MEDIA |
SETTING], then press 49. | ||
4 Press | / | to select [CLEAN UP], then |
press 49. |
|
|
5 Press 
/ 
to select [HDD] or [SD], then press 49.
●If the AC adapter is not connected to the camera, a warning message appears. In this case, connect the AC adapter.
6 Press 
/ 
to select [EXECUTE], then press 49.
●To cancel cleanup, select [CANCEL], then press
49.
7 When cleanup is finished, [CLEANING UP COMPLETED] appears. Press 49 to complete the operation.
●Depending on the hard disk drive it may take several minutes for this process to be completed.
CAUTION:
Do not remove the recording medium or perform any other operation (such as turning off the power) during cleanup.