GETTING STARTED EN 9
Attaching the Core Filter | LCD Monitor |
Attach the core filters to the cables. The core filter reduces interference.
1 Release the stoppers on both ends of the core filter.
Stopper
2 Run the cable through the core filter, leaving approx. 3 cm of cable between the cable plug and the core filter.
S-Video/Audio/Video/USB cable
Wind the cable once around the outside of the core filter as shown in the illustration.
Push the release button 
and open the LCD monitor fully. It can rotate 270°.
GETTING STARTED
3 cm
Core Filter (Large)
Wind once.
DC cord
Wind the cord twice around the outside of the core filter as shown in the illustration.
3 cm Core Filter (Small)
Wind twice.
●Wind the cable so that it is not slack.
3 Close the core filter until it clicks shut.
DC Cord | |
USB Cable |
NOTES:
●Take care not to damage the cable.
●When connecting a cable, attach the end with the core filter to the camera.