| MANAGING FILES EN 45 | |
Deleting Play List | Dubbing Using Play List |
|
You can delete unnecessary play lists.
1 Set the power switch to 
.
2 Set the MODE switch to 
.
3 Press MENU. The menu screen appears.
4 Press 
/ 
to select [PLAYLIST], then press 49.
5 Press 
/ 
to select [DELETE], then press 49. The table of play lists appears.
6 Press 
/ 
to select a play list you want to delete.
●The thumbnail appears on the upper right side.
●To delete all play lists at once, select [DELETE ALL].
7 Press 49.
8 Press 
/ 
to select [EXECUTE], then press 49. The selected play list is deleted.
●To cancel the setting, select [CANCEL], then press 49.
●Original files are not deleted even if you delete the play list.
Dubbing to an external device (VCR, DVD recorder etc.) using a play list is possible. The following explains how to dub to a VCR, but the same steps also apply for a DVD recorder, etc.
1 Connect the camera and your VCR with the S/AV cable. ( pg. 26)
2 Set the VCR to VIDEO/AUXILIARY input and engage the recording standby mode.
●For details on how to set VIDEO/AUXILARY input, refer to VCR instructions.
3 Set the power switch to 
.
4 Set the MODE switch to 
.
5 Press MENU. The menu screen appears.
6 Press 
/ 
to select [PLAYLIST], then press 49.
7 Press 
/ 
to select [PLAYLIST CONTENTS], then press 49. The table of play lists appears.
8 Press 
/ 
to select a list you want to dub.
●The scroll bar can also be used with the zoom lever and pressing 
/ 
. ( pg. 25)
9 Press 
. Screen for dubbing appears.
10 Press 
/ 
to select [START PLAYBACK], then press 49. Playback on the camera starts.
●The black screen is displayed for 5 seconds at the beginning and the end of the play list playback.
●To cancel the setting, press 
/ 
to select [CANCEL], then press 49.
11 While the black screen is displayed for
5 seconds, start recording on the VCR. (Refer to your VCR’s instruction manual.)
12 To stop dubbing, stop recording on the VCR while the black screen is displayed for 5 seconds.
ADVANCED OPERATIONS