JVC LYT1495-001A manual Deleting Files, Button, Deleting on the Menu Screen

MANAGING FILES EN 39

To protect all files					Deleting Files
5 Press	/	to select [PROTECT ALL], then						/
press 49.			You can delete unnecessary files.
6 Press	/	to select [EXECUTE], then	Deleting by the				Button
press 49.
● All files are protected.			1 Set the power switch to .
To release protection of all files
			2 Select the file type (video or still image) using
5 Select [CANCEL ALL], then press 49.
			the MODE switch.
6 Press	/	to select [EXECUTE], then	3 Press			/ /	/ to display the desired file,
press 49.			then press .
CAUTION:			● You can also select the file on the index screen.
				( pg. 25, 29)
Do not remove the recording medium or perform
			4 Press			/	to select [EXECUTE], then
any other operation (such as turning off the power)
during protection. Also, be sure to use the provided			press 49.
AC adapter, as the data on the recording medium			NOTE:
may be corrupted if the battery becomes exhausted
during protection. If the data on the recording			If you press			during recording mode, the file
medium becomes corrupted, format it. ( pg. 20)			recorded most recently will be deleted. However, if
			the recording mode (video or still image) is switched
			or the power is turned off and on again after
			recording, you cannot delete the file.
			Deleting on the Menu Screen
			1 Set the power switch to .
			2 Select the file type (video or still image) using
			the MODE switch.
			3 Press MENU. The menu screen appears.
			4 Press			/	to select [DELETE], then press
			49.

To delete the currently displayed file

5 Press / to select [CURRENT], then press 49.

6 Press / to select [EXECUTE], then press 49.

● You can select the previous or next file by pressing / .

ADVANCED OPERATIONS

CONTINUED ON NEXT PAGE