REMOTE
OFF: Makes the camera not to receive the signal from the remote control.
[ON]: Enables the operation with the remote control.
DROP DETECTION
OFF: Disables the function.
[ON]: Turns off the power automatically to prevent HDD damage when the camera is accidentally dropped. ( pg. 21)
CAUTION:
Setting this function to off increases the chances of damaging the internal hard disk if the camera is accidentally dropped.
REC MEDIA SETTING
MENU SETTINGS EN 49
NO. RESET
[VIDEO] / IMAGE
By resetting the file number (name), a new folder will be made. The new files you are going to make will be stored in the new folder. ( pg. 42)
DISPLAY
BRIGHT
When this item is selected, the brightness control indicator appears. Adjust the brightness of the display using / , then press 49.
( pg. 18)
DATE/TIME
OFF: The date/time does not appear.
[AUTO]: Displays the date/time for approx. 5 seconds in the following cases.
VIDEO MODE
[HDD] / SD
IMAGE MODE
[HDD] / SD
FORMAT
Media selection can be set for each recording and playback mode: video ( ) or still image
().
HDD: The
SD: SD card is selected as a recording medium.
●When the power switch is set from OFF to
●When playback starts
●When the date is changed during playback
ON: The date/time is always displayed.
NOTES:
● Only the date is displayed for the video playback. |
| ||
● You can set to different setting for each mode |
| ||
SETTINGS | |||
(video recording/playback and still image | |||
recording/playback). | |||
|
| ||
SCENE COUNTER |
| ||
| MENU | ||
[OFF]: Disables the function. | |||
ON: Displays the counter during video mode. | |||
|
|
| |
LANGUAGE |
|
[HDD] / SD
You can format (initialise) the
CLEAN UP
[HDD] / SD
Writing speed of recording media tends to become slow after long period of repeated use. To regain the speed, execute cleanup periodically. ( pg. 40)
COPY/MOVE
[COPY] / MOVE
You can copy or move still image files between the
[ENGLISH] / FRANÇAIS / DEUTSCH / |
ESPAÑOL / ITALIANO / NEDERLANDS / |
РУССКИЙ |
The language setting can be changed. |
( pg. 17) |
CLOCK ADJUST
“Date/Time Settings” ( pg. 18)