JVC DPT 115 manual Communications Interface, 3 RS-422 Connector, Pin # Description

Page 14

5.1.2 Communications Interface

Control of the pan and tilt is accomplished by sending packets of ASCII characters to the head. The standard communications protocol is 9600 baud, eight data bits, one stop bit , and no parity. These commands tell the head and lens which direction and at what rate to move. Preset related commands are also passed over the communication link between the head and the controller. In most cases the communications link is either RS-422 or RS-232. The micro-processor in the pan and tilt head will automatically detect the communication type being received, and select that communication interface type to transmit data back to the controller. The pan and tilt also has the provision to use both type interfaces concurrently for special purpose application

The RS-422 communications interface is also used to pass camera control commands to the camera in the camera control mode (LDCC) for JVC cameras. In this mode the controller sends the camera commands to the head in RS-422 format on the four wire cable. The commands are received in RS-422 and converted to TTL levels by electronics in the head. These commands are the sent out the RS-232 connector via the pan and tilt LDCC cable (P/N ACA96037900) to the camera. These camera control commands enter the camera on the six pin mini-DIN “REMOTE” connector on the rear panel of the camera

5.1.3 RS-422 Connector

The connector labeled “RS422” on the connector plate is a six position, four conductor modular jack. This connector provides differential 0 to +5 VDC voltage signals to and from the digital pan and tilt head, this is the most common interface from the controller to the heads. Shown below is the pin-out for the RS-422 connector. The pin assignment for this connector follows:

Pin 1

 

 

Pin 2

 

 

 

Pin 5

 

Pin 6

Not

 

 

 

 

 

 

Not

 

 

 

 

 

 

 

 

Used

 

 

 

 

 

 

 

 

Used

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The pin assignment for this connector follows:

 

Pin #

Description

2

P/T Data Out -

3

P/T Data Out +

4

P/T Data In -

5

P/T Data In +

2/12/05

14

Document D0153

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operations Manual Table of Contents Trouble Shooting Introduction PAN & Tilt Head Specifications BNC 1 RS-422 Power on TestOperation 2 RS-232Pan & Tilt Limit Adjustment Pan AdjustmentTilt Adjustment Setup Switch Pack Switch PANEL, Controls and IndicatorsPower Switch Setup Switches located on the base of the DPT Common ReturnData Indicator-Red LED IndicatorsPower Indicator-Green LED Connector Information Connector Panel Pin # Description 3 RS-422 ConnectorCommunications Interface 4 RS-232 Connector Pin # Description, RS-232 ApplicationVideo 5 +15 VDC Power JackPAN & Tilt Trunnion Connectors 2 DIN, 8 pin CircularDIN Connector Teleconferencing DPT Jumper Installation Installation Tools and Equipment Needed Standard InstallationBalance Point Camera & Lens Over Center of P/T DPT Digital Pan & Tilt DPT 115 Footprint DrawingMounting Teleconferencing Lens Adapter Balancing Camera and Lens Balance Point Camera & Lens Inverted Installation Wall Mount Installation Tripod Installation Attach Video Cable, User Equipment 4 RS-422 Cable InstallationCabling Attach 18 Inch Coax Video CableLens Control Cable Installation 5 RS-232 Cable InstallationPower Cable Installation DPT 115 Ldcc Cable Installation Used with Ldcc Option Only Lens Control Trouble ShootingPAN & Tilt LdccPresets Technical SupportCable Drawings Lens Cable Drawing PAN & Tilt Ldcc Cable Drawing RS-422 Cable Drawing RS-232 Cable DrawingSerial Command List Command LetterGlossary

DPT 115 specifications

The JVC DPT 115 is a compact and lightweight portable player that has made a notable impact in the world of audio technology. This device is particularly revered for its impressive sound quality and user-friendly features, catering to both casual listeners and audiophiles alike.

One of the standout features of the DPT 115 is its ability to support high-resolution audio formats. It is capable of playing a wide range of audio files, including FLAC, WAV, and even DSD, allowing users to experience their music in unmatched clarity and detail. This high-resolution support ensures that every note and nuance of a track is conveyed accurately, enhancing the overall listening experience.

The device sports a sleek and ergonomic design, making it highly portable. Weighing in at just a few hundred grams, it easily fits into pockets or small bags, so users can enjoy music on the go. The intuitive control layout enables hassle-free navigation through tracks and playlists, ensuring that users can quickly access their favorite songs without any distractions.

Another significant feature of the JVC DPT 115 is its robust battery life. With the capacity to play music for up to 20 hours on a single charge, this player ensures long listening sessions without frequent interruptions for recharging. Additionally, a quick charge feature allows users to get several hours of playback with just a short charge time, emphasizing convenience in its usability.

The DPT 115 also incorporates Bluetooth connectivity, allowing users to stream music wirelessly from compatible devices. With support for high-quality audio codecs such as aptX, the device ensures that the streaming quality remains high, providing a seamless wireless listening experience.

In summary, the JVC DPT 115 is a versatile, high-performance portable audio player that stands out with its support for high-resolution audio formats, ergonomic design, excellent battery life, and wireless capabilities. Whether you're at home or on the move, the DPT 115 offers an exceptional audio experience that is hard to match, making it an ideal choice for anyone looking to elevate their music listening journey.
Top Page Image Contents