KY-F55 Configuration
Attach the 8-pin circular DIN male connector of the lens control cable (ACL99088000) to the 8- pin female DIN on the trunnion of the pan and tilt. Attach the other end, a male Hirose connector to the female Hirose on the teleconferencing lens.
At this time there will be one cable on the teleconferencing lens not connected. Plug this male Hirose connector into the female “LENS” connector on the rear of the KY-F32 camera.
DPT 115 LDCC Cable Installation (Used with LDCC Option Only)
Attach the 9-pin Dsub male connector of the DPT 115 LDCC cable (ACA96052200) to the “RS232” connector on the base of the pan and tilt. Connect other end, 6-pin male mini-DIN to “REMOTE” connector on rear of camera.