Table of Contents
1. | INTRODUCTION | 4 | ||
2. PAN & TILT HEAD SPECIFICATIONS: | 5 | |||
3. | OPERATION | 7 | ||
3.1 | CONTROLLER | 7 | ||
| 3.1.1 | 7 | ||
| 3.1.2 | 7 | ||
3.2 | COMPUTER | 7 | ||
3.3 | SYSTEM TEST | 7 | ||
| 3.3.1 | Power “ON” Test | 7 | |
| 3.3.2 Pan & Tilt Limit Adjustment | 8 | ||
4. SWITCH PANEL, CONTROLS AND INDICATORS | 10 | |||
4.1 | CONTROLS | 10 | ||
| 4.1.1 | Power Switch | 10 | |
| 4.1.2 | Setup Switch Pack | 10 | |
4.2 | INDICATORS | 12 | ||
| 4.2.1 | Power | 12 | |
| 4.2.2 | Data | 12 | |
5. | CONNECTOR INFORMATION | 13 | ||
5.1 | CONNECTOR PANEL | 13 | ||
| 5.1.1 Lens I/F Connector: NOT USED JVC Configuration | 13 | ||
| 5.1.2 | Communications Interface | 14 | |
| 5.1.3 | 14 | ||
| 5.1.4 | 15 | ||
| 5.1.5 +15 VDC Power Jack | 16 | ||
| 5.1.6 | VIDEO | 16 | |
5.2 | PAN & TILT TRUNNION CONNECTORS | 16 | ||
| 5.2.1 | Video in | 16 | |
| 5.2.2 DIN, 8 pin Circular | 16 | ||
5.3 | DPT JUMPER INSTALLATION | 18 | ||
6. | INSTALLATION | 19 | ||
6.1 | TOOLS AND EQUIPMENT NEEDED | 19 | ||
6.2 | STANDARD INSTALLATION | 19 | ||
|
|
|
| |
6.3 | DPT 115 FOOTPRINT DRAWING | 21 | ||
6.4 | MOUNTING TELECONFERENCING LENS ADAPTER | 22 | ||
6.5 | BALANCING CAMERA AND LENS | 23 | ||
2/12/05 | 2 | Document D0153 | ||
|
|