4.SWITCH PANEL, CONTROLS AND INDICATORS
4.1CONTROLS
4.1.1 Power Switch
A main power switch is provided at the switch panel of the pan and tilt head. When closed this small slide switch provides DC voltage from the pan and tilt power supply to the electronics located within the base of the head. The “POWER” LED will illuminate indicating that power is applied to the pan and tilt head control electronics. The power switch is “ON” when it is in the down position.
4.1.2 Setup Switch Pack
The eight “SETUP” switches are located adjacent to the power indicator on the pan and tilt switch panel. These switches are labeled one through eight, the function of these switches are defined in the diagram on the next page.
2/12/05 | 10 | Document D0153 |
|